Difference between revisions of "S7-SoftPLC:cifX PROFIBUS® configuration via S7 for Windows®/STEP®7"
(One intermediate revision by one other user not shown) | |||
Line 11: | Line 11: | ||
'''Enable PU/OP functions via PROFIBUS<sup>®</sup> DP''' | '''Enable PU/OP functions via PROFIBUS<sup>®</sup> DP''' | ||
− | Allows a PU-communication via the PROFIBUS<sup>®</sup> to ''S7-SoftPLC''. Some OP's (as e.g. OP3) use PU-communication for data exchange with the PLC, so that these panels can be used as well.1) | + | Allows a PU-communication via the PROFIBUS<sup>®</sup> to ''S7-SoftPLC''. Some OP's (as e.g. OP3) use PU-communication for data exchange with the PLC, so that these panels can be used as well. 1) |
Line 17: | Line 17: | ||
Allows sending and receiving DPV1 functions to DPV1 slaves. SFB52 and SFB53 are available for DPV1 services.* | Allows sending and receiving DPV1 functions to DPV1 slaves. SFB52 and SFB53 are available for DPV1 services.* | ||
+ | |||
1) The bus configuration has to be created with ''S7 for Windows''<sup>®</sup> hardware configuration or STEP<sup>®</sup>7 hardware configuration.<br /> | 1) The bus configuration has to be created with ''S7 for Windows''<sup>®</sup> hardware configuration or STEP<sup>®</sup>7 hardware configuration.<br /> |
Latest revision as of 12:31, 17 January 2013
User Interface
Use PROFIBUS® configuration from PLC
Takes the PROFIBUS® configuration created with S7 for Windows®/STEP®7. The bus will be configured and operated with these parameters from the PLC.
Enable PU/OP functions via PROFIBUS® DP
Allows a PU-communication via the PROFIBUS® to S7-SoftPLC. Some OP's (as e.g. OP3) use PU-communication for data exchange with the PLC, so that these panels can be used as well. 1)
Activate DPV-1 functions on the PROFIBUS®
Allows sending and receiving DPV1 functions to DPV1 slaves. SFB52 and SFB53 are available for DPV1 services.*
1) The bus configuration has to be created with S7 for Windows® hardware configuration or STEP®7 hardware configuration.
The configuration has to be created exclusively with General Station Description (GSD)
Settings
In the section [CIFX] PROFIBUS® specific settings are conducted. The settings are necessary, if the bus configuration is to be created with the S7 for Windows® hardware configuration or the STEP®7 hardware configuration.
Keyname | Value range | Default value | Description |
---|---|---|---|
B##C##SDBConf | 0 / 1 | 0 | Use PROFIBUS® configuration from PLC
0 = No, 1 = Yes |
B##C##DPV1Active | 0 / 1 | 0 | 1=Allows sending and receiving DPV1 functions to DVP1 slaves. SFB52 and SFB53 are available for DPV1 services. |
B##C##PBPGOPActive | 0 / 1 | 0 | 1=Allows a PU-communication via the PROFIBUS® to S7-SoftPLC. Some OP's (as e.g. OP3) use PU-communication for data exchange with the PLC, so that these panels can be used as well. |