Difference between revisions of "S7-PCI315:Configuration INI file"
(→Layout of INI) |
|||
| Line 9: | Line 9: | ||
The S7-PCI300.INI has a section named [S7-PCI300].There is a key for the PU named "PG", that contains a serial number as value. | The S7-PCI300.INI has a section named [S7-PCI300].There is a key for the PU named "PG", that contains a serial number as value. | ||
Every configured ''S7-PCI315'' PLC owns a key named by its serial number and the assigned slot as value.Valid slot values are from 3 to 11. | Every configured ''S7-PCI315'' PLC owns a key named by its serial number and the assigned slot as value.Valid slot values are from 3 to 11. | ||
| − | The serial number is printed on a [[ | + | The serial number is printed on a [[S7-PCI315:Service configuration|label]] on ''S7-PCI315'' board. |
==== Example ==== | ==== Example ==== | ||
Latest revision as of 10:12, 6 August 2012
Configuration of service using S7-PCI300.INI
At startup the S7NetPLCCommSvc service parses the file S7-PCI300.INI.
If no file is found, then the first found S7-PCI315 device is configured for the PU channel (slot 2) and for HMI access on slot 3.
Layout of INI
The S7-PCI300.INI has a section named [S7-PCI300].There is a key for the PU named "PG", that contains a serial number as value. Every configured S7-PCI315 PLC owns a key named by its serial number and the assigned slot as value.Valid slot values are from 3 to 11. The serial number is printed on a label on S7-PCI315 board.
Example
The example listed below contains two S7-PCI315 boards configured on slot 3 and 7. The key "PG" identifies, which board is accessible via the PU channel (slot 2), too.
[S7-PCI300]
PG=1800410-20006
1800410-20010=3
1800410-20006=7
