S7-PCI315:Service configuration

The service/daemon must be configured. The slot number of a PLC rack must be assigned to a physical S7-PCI315 in the PC. This way it is known, which slot number will be routed to which board.

NOTE: IF THE CONFIG FILE (S7-PCI300.INI) IS NOT EXISTANT OR NO INSTALLED BOARD IS CONFIGURED, THE FIRST FOUND DEVICE IS CONFIGURED FOR SLOT 2 FOR PU ACCESS. ADDITIONALLY A LOG MESSAGE IS LISTED IN THE USER INTERFACE.

Service configuration by user interface (Windows 2000/XP/VISTA(32Bit)/Windows 7(32Bit))

Service configuration via config file S7-PCI300.INI

Serial number

The serial number is build by the two numbers 'DeviceNumber' and 'SerialNo'.

The serial number is printed on the box of S7-PCI315 PLC.

According to this picture the serial number 1800410-20016 is given.

The serial number is printed on a label on top of theS7-PCI315 PLC.

According to this picture the serial number 1701430-21651 is given.

The separate "4" in the numbers on the image identifies the hardware revision.