S7-SoftPLC:Configure the CP343/CP443 emulation via user interface

The basic settings of the CP343/CP443 emulation are conducted here.

Start CP343/443 Emulation with the S7-SoftPLC

Starts the CP emulation automatically, if S7-SoftPLC is starting.

Use FB55 (IP_CONFIG)

Shows the FB55 in the block list of S7-SoftPLC.

Use FC5 (AG_SEND)

Shows the FC5 in the block list of S7-SoftPLC.

Use FC6 (AG_RECV)

Shows the FC6 in the block list of S7-SoftPLC.

Use FC7 (AG_LOCK)

Shows the FC7 in the block list of S7-SoftPLC.

Use FC8 (AG_UNLOCK)

Shows the FC8 in the block list of S7-SoftPLC.

Use FC10 (AG_CNTRL)

Shows the FC10 in the block list of S7-SoftPLC.

Use FC50 (AG_LSEND)

Shows the FC50 in the block list of S7-SoftPLC.

Use FC60 (AG_LRECV)

Shows the FC60 in the block list of S7-SoftPLC.

Use FC62 (C_CNTRL)

Shows the FC62 in the block list of S7-SoftPLC.

Send TCP acknowledges (some CPs)

Sends TCP acknowledges.

Start Modbus TCP server

Starts the Modbus TCP Server when starting the CP343/443.

Port

Assigns the defined port to the Modbus TCP Server. A Modbus TCP Server listens to Port 502 per default.

DBIn is Number

Data block number of the In-area.

DBOut is Number

Data block number of the Out-area.

Default

Sets all settings back to their default value.