S7-SoftPLC:ADDI-DATA driver for S7-SoftPLC
From IBHsoftec Wiki English
In order to activate the driver, the driver is included in the form dll0=addi_data.dll in the section [OEM].
The driver requires the section [addi_data], in which further parameters can be defined.
| Name of parameter | Default value | Description |
|---|---|---|
| Read8FC | 100 | Number of FC Read8DigitalInputs |
| Read16FC | 101 | Number of FC Read16DigitalInputs |
| Read32FC | 102 | Number of FC Read32DigitalInputs |
| Set8FC | 103 | Number of FC Set8DigitalOutputs |
| Set16FC | 104 | Number of FC Set16DigitalOutputs |
| Set32FC | 105 | Number of FC Set32DigitalOutputs |
| InitAnaInpFC | 106 | Number of FC InitAnalogInput |
| RelAnaInpFC | 107 | Number of FC ReleaseAnalogInput |
| InitAnaOutFC | 108 | Number of FC InitAnalogOutput |
| ReadAnaInpFC | 109 | Number of FC ReadAnalogInput |
| WriteAnaOutFC | 110 | Number of FC WriteAnalogOutput |
| NoStop | 0 | 0 = Driver is initialised at every PLC-START
1 = Driver is initialised once |
It must be pointed out, that a unique number is assigned to every FC-block!
Example:
[OEM] dll0=addi_data.dll
[addi_data] Read8FC=100 Read16FC=101 Read32FC=102 Set8FC=103 Set16FC=104 Set32FC=105 InitAnaInpFC=106 RelAnaInpFC=107 InitAnaOutFC=108 ReadAnaInpFC=109 WriteAnaOutFC=110 NoStop=0
