Difference between revisions of "S7-PCI315:WinCC Flexible local"
| Line 1: | Line 1: | ||
== WinCC Flexible Runtime local with IBHsoftec S7-PCI315 == | == WinCC Flexible Runtime local with IBHsoftec S7-PCI315 == | ||
If you want to use the Runtime Version of WinCC Fleixible on the PC where the S7 PCI315 card is plugged in, | If you want to use the Runtime Version of WinCC Fleixible on the PC where the S7 PCI315 card is plugged in, | ||
| − | you have to setup WinCC Fleixible in the | + | you have to setup WinCC Fleixible in the following way. |
From the control panel open the "Set PG/PC interface" dialogbox and select '''S7ONLINE''' and '''IBH S7-PCI315 Intern(MPI)'''. | From the control panel open the "Set PG/PC interface" dialogbox and select '''S7ONLINE''' and '''IBH S7-PCI315 Intern(MPI)'''. | ||
[[Image:S7-PI315_PC_PG_Eng.png|422px]] | [[Image:S7-PI315_PC_PG_Eng.png|422px]] | ||
| − | Within WinCC in the project tree-item <Connections> now the connection has to be given a name, in our sample'''S7-PCI315 Lokal'''. | + | Within WinCC Flexible in the project tree-item <Connections> now the connection has to be given a name, in our sample'''S7-PCI315 Lokal'''. |
As <Communication driver> '''SIMATIC S7 300/400''' has to be selected. | As <Communication driver> '''SIMATIC S7 300/400''' has to be selected. | ||
Latest revision as of 13:56, 29 June 2012
WinCC Flexible Runtime local with IBHsoftec S7-PCI315
If you want to use the Runtime Version of WinCC Fleixible on the PC where the S7 PCI315 card is plugged in, you have to setup WinCC Fleixible in the following way. From the control panel open the "Set PG/PC interface" dialogbox and select S7ONLINE and IBH S7-PCI315 Intern(MPI).
Within WinCC Flexible in the project tree-item <Connections> now the connection has to be given a name, in our sampleS7-PCI315 Lokal.
As <Communication driver> SIMATIC S7 300/400 has to be selected.
For <Interface> choose MPI/DP. Through the setting of the PG/PC interface internal the fasted communication way (S7 TCP/IP) will be choosen, independent what Baud rate is selected.
Verify the parameters of the PLC:
The configuration of the connection is now completed and you can continue with defining your variables.
