S7-PCI315:WinCC Flexible local

From IBHsoftec Wiki English
Jump to: navigation, search

WinCC Flexible Runtime local with IBHsoftec S7-PCI315

If you want to use the Runtime Version of WinCC Fleixible on the PC where the S7 PCI315 card is plugged in, you have to setup WinCC Fleixible in the following way. From the control panel open the "Set PG/PC interface" dialogbox and select S7ONLINE and IBH S7-PCI315 Intern(MPI).

S7-PI315 PC PG Eng.png

Within WinCC Flexible in the project tree-item <Connections> now the connection has to be given a name, in our sampleS7-PCI315 Lokal.

As <Communication driver> SIMATIC S7 300/400 has to be selected.

For <Interface> choose MPI/DP. Through the setting of the PG/PC interface internal the fasted communication way (S7 TCP/IP) will be choosen, independent what Baud rate is selected.

Verify the parameters of the PLC:

S7-PI315 Connections.png

The configuration of the connection is now completed and you can continue with defining your variables.