S7-PCI315:Technical Data
From IBHsoftec Wiki English
Technical Data PLC
| S7-PCI315 | |
|---|---|
| working memory | 256kB |
| load memory | 256kB |
| Remanent memory | entire memory |
| Typical execution times | 0,200 µs/Instr. |
PU functions with STEP®7 or S7 for Windows® via MPI/PROFIBUS, via Ethernet using the ISO-On-TCP (RFC1006) or the IBHNet protocol. Alternatively the communication can take place via a virtual PC Adaptor.
Visualizations can connect via MPI/PROFIBUS, ISO-On-TCP (RFC1006), the IBHLink protocol or via the optional IBH OPCServer for visualization PC.
Technical Data Hardware
| S7-PCI315 | |
|---|---|
| System Interface | PCI V2.3, 33 MHz |
| Fieldbus | PROFIBUS |
| LED | SYS, APL, COM0, COM1 |
| Operating Elements | RUN/STOP Switch |
| Battery Type | CR 2032 |
| Memory Card | micro SD |
| PROFIBUS Interface | DSub female Connector, 9 pin optically isolated RS-485 interface |
| Power Supply | Rev 3:
5 V (4,5 ... 5,5 V), 500 mA |
| External Power Supply | 18 ... 30 V DC |
| Dimensions (L x W x D) | 120 mm x 90 mm 20 mm
130 x 121 x 22 mm over all |
| Operating Temperatur | 0 ... 55 °C |
Protocols
| Parameter | Description |
|---|---|
| Maximum number of supported DPV0/DPV1 slaves | 125 |
| Maximum number of total cyclic input data | 3584 Bytes |
| Maximum number of total cyclic output data | 3584 Bytes |
| Maximum number of cyclic input data | 244 Bytes/Slave |
| Maximum number of cyclic output data | 244 Bytes/Slave |
| Configuration data | Max. 244 Bytes per slave |
| Baud rate | Fixed values from 9,6 kBits/s to 12 MBit/s
Auto-detection mode is not supported |
| Data transport layer | PROFIBUS FDL |
| Limitations | DP V2 services are not implemented |
