S7-PCI315:Device Driver Setup

From IBHsoftec Wiki English
Jump to: navigation, search

Device Driver Setup

1. Setup language

  • Select the setup language.

Sprache wählen

  • Click OK.

2. Continue installation

  • Click "Next >" to continue.

Willkommen

3. Installation

  • Click "Install" to start the installation.

Installieren

The device driver will be (pre)installed.

4. Message: Device Driver is prepared

  • Click "OK" to confirm.

Anschließen

5. Finish installation

  • Click "Finish".

Installation abgeschlossen

The installation is completed.


NOTE: THE S7-PCI315 PLC CAN NOW BE INSTALLED.

Installing the Device Driver

In case the S7-PCI315 was installed then the Windows® Hardware Detection asks for a driver at the next start of the PC.

1. Switch on the PC

  • After installing the S7-PCI315 PLC switch on your PC.
  • Windows® detects the S7-PCI315 PLC automatically.
  • The message "Found New Hardware" is displayed and the "Found new Hardware Wizard" is started

2. Windows Update

  • Select "No, not this time".

Assistent neue Hardware

  • Click "Next >" to continue.

3. Install software automatically

  • Select "Install software automatically".

Software automatisch installieren

  • Click "Next >" to continue.

The preinstalled device driver is found and installed then.

4. Finish installation

  • Click "Finish".

Fertigstellen des Assistenten

The installation is completed.

5. Check in the "Device Manager" whether the driver for the S7-PCI315 PLC is installed properly.

  • Open the "Device Manager": Desktop symbol "My Computer" > right mouse button "Properties" > Tab "Hardware" > button "Device Manager".
  • Check, whether the display in the "Device Manager" shows "netPLC C100 PCI/PCIe Device"

cifX Communication Interface

Retrieved from "https://wiki.ibhsoftec.com/en/index.php?title=S7-PCI315:Device_Driver_Setup&oldid=572"