S5/S7 for Windows:USB Prommer Driver

From IBHsoftec Wiki English
Jump to: navigation, search

Driver support for the USB-Prommer

S5/S7 for Windows ® supports the libusb driver which allows the operation of the Siemens USB-Prommer (6ES7 792-0AA00-0XA0) under current operating systems. Depending on whether the original Siemens driver for the USB-Prommer is already installed on the PC, the libusb driver must be installed in two different ways.

Check whether the Siemens USB-Prommer driver is installed

If the USB-Prommer is connected to the PC, check within the device manager whether the Siemens USB-Prommer driver is installed.

Siemens driver for the USB-Prommer is already installed on the PC:

System with driverr.png

Siemens driver for the USB-Prommer is not installed on the PC:

System no driverr.png

Installation of the libusb driver with already installed Siemens driver

In this case the libusb-win32 filter driver must be installed. This allows a control of the USB prommer parallel to the already installed Siemens driver, without impairing its function.

After the start of the Setup the option Install a device filter must be chosen.

Libusb filter driver.png

After installation the libusb-win32 filter installer needs to be started. Within this program the entry for the USB-Prommer must be selected and the button Install msut be pressed.

Libusb device selection.png

The successful installation is indicated by the following message:

Libusb success.png

The dialog can be closed. The installation is completed and the USB-Prommer can be used within S5/S7 for Windows®.

Note: If an update of the Siemens software is performed, the driver needs to be installed again!

Installation of the libusb driver without installed Siemens driver

In this case the ZAdik Device Treiber must be installed.

When using the operating system Windows XP the setup with the file namezadig_xp_2.1.2.exe must be started.

When using the operating system VISTA, Windows 7,Windows 8 or Windows 10 the Setup with the file namezadig_2.1.2.exe must be started.

After installation the ZAdik Device Driver will be started. Within this program the entry for the USB-Prommer and the driver libsub-win32(v1.2.6.0)must be selected and the button Install must be pressed.

The libsub-win32 (v1.2.6.0) must also be selected when using 64 bit operating systems!

Prommer driver.png


The dialog can be closed. The installation is completed and the USB-Prommer can be used within S5/S7 for Windows®.

Using the Siemens driver without libusb driver

Caution: The supplied driver (10/2007) can only be installed on 32-bit systems. Newer versions of the driver only have support for S7 memory modules.