Difference between revisions of "S7-PCI315:Configuration INI file"
(Created page with "== Configuration of service using S7-PCI300.INI == At startup the S7NetPLCCommSvc service parses the file S7-PCI300.INI. If no file is found, then the first found ''S7-PCI31...") |
|||
| Line 11: | Line 11: | ||
The serial number is printed on a [[CommonConfiguration.htm#Seriennummer|label]] on ''S7-PCI315'' board. | The serial number is printed on a [[CommonConfiguration.htm#Seriennummer|label]] on ''S7-PCI315'' board. | ||
| − | === Example === | + | ==== Example ==== |
The example listed below contains two ''S7-PCI315'' boards configured on slot 3 and 7. The key "PG" identifies, which board is accessible via the PU channel (slot 2), too. | The example listed below contains two ''S7-PCI315'' boards configured on slot 3 and 7. The key "PG" identifies, which board is accessible via the PU channel (slot 2), too. | ||
| + | |||
[S7-PCI300]<br /> | [S7-PCI300]<br /> | ||
Revision as of 10:11, 6 August 2012
Configuration of service using S7-PCI300.INI
At startup the S7NetPLCCommSvc service parses the file S7-PCI300.INI.
If no file is found, then the first found S7-PCI315 device is configured for the PU channel (slot 2) and for HMI access on slot 3.
Layout of INI
The S7-PCI300.INI has a section named [S7-PCI300].There is a key for the PU named "PG", that contains a serial number as value. Every configured S7-PCI315 PLC owns a key named by its serial number and the assigned slot as value.Valid slot values are from 3 to 11. The serial number is printed on a label on S7-PCI315 board.
Example
The example listed below contains two S7-PCI315 boards configured on slot 3 and 7. The key "PG" identifies, which board is accessible via the PU channel (slot 2), too.
[S7-PCI300]
PG=1800410-20006
1800410-20010=3
1800410-20006=7
