Difference between revisions of "IBH Link UA:Reset button"
From IBHsoftec Wiki English
(Created page with "The reset button is located behind the central air vent below the QR codes. With the following procedure the IBH Link UA will be reset to the factory settings of the current...") |
|||
| Line 18: | Line 18: | ||
| − | 4. Wait until all four LEDs are red | + | 4. Wait until all four LEDs are red and go back out |
Latest revision as of 10:59, 31 March 2016
The reset button is located behind the central air vent below the QR codes.
With the following procedure the IBH Link UA will be reset to the factory settings of the current device firmware.
Procedure:
1. Power off the IBH Link UA
2. Press the button and hold
3. Power on the IBH Link UA
4. Wait until all four LEDs are red and go back out
5. Release the button
6. Wait until the SYS led shows a heartbeat (approx. 2 min)
