Difference between revisions of "IBHLink S7++ S7-300/S7-400 Elipse Scada"
| Line 33: | Line 33: | ||
Within the MProt settings the MPI/DP address of the PLC has to be entered as <Default slave address> | Within the MProt settings the MPI/DP address of the PLC has to be entered as <Default slave address> | ||
| − | [[Image:Elipse_driver_settings.png|456px]] | + | [[Image:Elipse_driver_settings.png|456px]]<br /> |
| + | |||
| + | |||
| + | Enter the IP Address of the IBH LinkS7 ++ and choose port 102:<br /> | ||
| − | |||
[[Image:Elipse_driver_settings_ethernet.png|456px]] | [[Image:Elipse_driver_settings_ethernet.png|456px]] | ||
The configuration of the connection is now completed and you can continue with defining your Tags. | The configuration of the connection is now completed and you can continue with defining your Tags. | ||
Revision as of 13:20, 4 June 2012
It is possible to realize a connection from a PC with Elipse SCADA to a S7-300/400 station over ethernet using an IBHLink S7++ as gateway.
Example
In the following example a configuration with Elipse SCADA is shown. The HMI station is connected to the IBHLink S7++ via an Ethernet connection. The IBHLink S7++ itself is connected to a S7-300/S7-400 station by MPI or PROFIBUS. Bus parameters were configured by the IBHNet configuration tool.
The following addresses were chosen in the example:
IP addresses:
| Station | Address |
|---|---|
| HMI station | 192.168.10.122 |
| IBHLink S7++ | 192.168.10.125 |
PPI addresses:
| Station | Address |
|---|---|
| IBHLink S7++ | 17 |
| S7-300/S7-400 station | 2 |
Configuration:
The ethernet communication driver for S7-300/400 named MProt.dll must be selected witin the Application Organizer:
Within the MProt settings the MPI/DP address of the PLC has to be entered as <Default slave address>
Enter the IP Address of the IBH LinkS7 ++ and choose port 102:
The configuration of the connection is now completed and you can continue with defining your Tags.
