Difference between revisions of "IBHLink S7++ S7-300/S7-400 Elipse Scada"
Line 1: | Line 1: | ||
− | It is possible to realize a connection from a PC with Elipse | + | It is possible to realize a connection from a PC with '''Elipse SCADA''' to a S7-300/400 station over ethernet using an IBHLink S7++ as gateway. |
==Example== | ==Example== | ||
− | In the following example a configuration with Elipse | + | In the following example a configuration with '''Elipse SCADA''' is shown. |
The HMI station is connected to the IBHLink S7++ via an Ethernet connection. The IBHLink S7++ itself is connected to a S7-300/S7-400 station by MPI or PROFIBUS. Bus parameters were configured by the IBHNet configuration tool. | The HMI station is connected to the IBHLink S7++ via an Ethernet connection. The IBHLink S7++ itself is connected to a S7-300/S7-400 station by MPI or PROFIBUS. Bus parameters were configured by the IBHNet configuration tool. | ||
Line 35: | Line 35: | ||
[[Image:Elipse_driver_settings.png|456px]] | [[Image:Elipse_driver_settings.png|456px]] | ||
− | + | Enter the IP Address of the IBH LinkS7 ++ and choose port 102: | |
− | + | [[Image:Elipse_driver_settings_ethernet.png|456px]] | |
− | [[Image: | + | |
The configuration of the connection is now completed and you can continue with defining your Tags. | The configuration of the connection is now completed and you can continue with defining your Tags. |
Revision as of 13:16, 4 June 2012
It is possible to realize a connection from a PC with Elipse SCADA to a S7-300/400 station over ethernet using an IBHLink S7++ as gateway.
Example
In the following example a configuration with Elipse SCADA is shown. The HMI station is connected to the IBHLink S7++ via an Ethernet connection. The IBHLink S7++ itself is connected to a S7-300/S7-400 station by MPI or PROFIBUS. Bus parameters were configured by the IBHNet configuration tool.
The following addresses were chosen in the example:
IP addresses:
Station | Address |
---|---|
HMI station | 192.168.10.122 |
IBHLink S7++ | 192.168.10.125 |
PPI addresses:
Station | Address |
---|---|
IBHLink S7++ | 17 |
S7-300/S7-400 station | 2 |
Configuration:
The ethernet communication driver for S7-300/400 named MProt.dll must be selected witin the Application Organizer:
Within the MProt settings the MPI/DP address of the PLC has to be entered as <Default slave address>
Enter the IP Address of the IBH LinkS7 ++ and choose port 102:
The configuration of the connection is now completed and you can continue with defining your Tags.