Difference between revisions of "IBHLink S7++ S7-300/S7-400 Elipse Scada"
(Created page with "It is possible to realize a connection from a PC with Elipse Scada to a S7-300/400 station over ethernet using an IBHLink S7++ as gateway. ==Example== In the following exampl...") |
|||
| (15 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | It is possible to realize a connection from a PC with Elipse | + | It is possible to realize a connection from a PC with '''Elipse SCADA''' to a S7-300/400 station over ethernet using an IBHLink S7++ as gateway. |
==Example== | ==Example== | ||
| − | In the following example a configuration with Elipse | + | In the following example a configuration with '''Elipse SCADA''' is shown. |
| − | The HMI station | + | The HMI station is connected to the IBHLink S7++ via an Ethernet connection. The IBHLink S7++ itself is connected to a S7-300/S7-400 station by MPI or PROFIBUS. Bus parameters were configured by the IBHNet configuration tool. |
The following addresses were chosen in the example: | The following addresses were chosen in the example: | ||
| Line 29: | Line 29: | ||
Configuration: | Configuration: | ||
| − | The ethernet communication driver for S7 300/400 must be selected | + | The ethernet communication driver for S7-300/400 named '''MProt.dll''' must be selected witin the Application Organizer: |
| + | [[Image:Elipse_driver.png|600px]] | ||
| − | [[Image: | + | Within the MProt settings the MPI/DP address of the PLC has to be entered as <Default slave address> |
| + | [[Image:Elipse_driver_settings.png|456px]]<br /> | ||
| − | |||
| − | + | Enter the IP Address of the IBH LinkS7 ++ and choose port 102:<br /> | |
| − | The | + | [[Image:Elipse_driver_settings_ethernet.png|456px]] |
| + | |||
| + | Now the '''N''' an '''P''' Parameters must be set. The description you'll find within the helpfile '''<mprot_us.chm>'''<br /> | ||
| + | In the sample DB1.DB0 is chosen:<br /> | ||
| + | |||
| + | [[Image:Elipse_P_paramter.png|597px]] | ||
| + | [[Image:Elipse_N_paramter.png|597px]] | ||
| + | |||
| + | The configuration is now completed and the Tags can be used:<br /> | ||
| + | [[Image:Elipse_tags.png|397px]] | ||
Latest revision as of 14:01, 4 June 2012
It is possible to realize a connection from a PC with Elipse SCADA to a S7-300/400 station over ethernet using an IBHLink S7++ as gateway.
Example
In the following example a configuration with Elipse SCADA is shown. The HMI station is connected to the IBHLink S7++ via an Ethernet connection. The IBHLink S7++ itself is connected to a S7-300/S7-400 station by MPI or PROFIBUS. Bus parameters were configured by the IBHNet configuration tool.
The following addresses were chosen in the example:
IP addresses:
| Station | Address |
|---|---|
| HMI station | 192.168.10.122 |
| IBHLink S7++ | 192.168.10.125 |
PPI addresses:
| Station | Address |
|---|---|
| IBHLink S7++ | 17 |
| S7-300/S7-400 station | 2 |
Configuration:
The ethernet communication driver for S7-300/400 named MProt.dll must be selected witin the Application Organizer:
Within the MProt settings the MPI/DP address of the PLC has to be entered as <Default slave address>
Enter the IP Address of the IBH LinkS7 ++ and choose port 102:
Now the N an P Parameters must be set. The description you'll find within the helpfile <mprot_us.chm>
In the sample DB1.DB0 is chosen:
The configuration is now completed and the Tags can be used:
