IBHLink S5++:SIMATIC® S5 for Windows®

From IBHsoftec Wiki English
Revision as of 11:11, 19 November 2012 by Axel (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The text below describes the usage of S5 for Windows It is possible to realize a connection from a TIA Portal V11 WinCC flexible Runtime/Panel to a SIMATIC® S5 station over ethernet using an IBHLink S5++ as gateway.

Software requirements

  • S5 for Windows > V6.x
  • IBH link S5++ with firmware V1.48


Example

In the following example a configuration with TIA Portal V11 WinCC flexible is shown. The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a SIMATIC® S5 station on the AS511 port. Communication parameters were configured by the IBHNet configuration tool.

The following addresses were chosen in the example:

Retrieved from "https://wiki.ibhsoftec.com/en/index.php?title=IBHLink_S5%2B%2B:SIMATIC®_S5_for_Windows®&oldid=788"