Difference between revisions of "IBHLink S5++:SIMATIC® S5 for Windows®"
From IBHsoftec Wiki English
| Line 1: | Line 1: | ||
| − | The text below describes the connection of S5 for | + | The text below describes the connection of S5 for Windows® to a SIMATIC® S5 using the [http://www.ibhsoftec.com/IBH-Link-S5-PP-Eng IBHLink S5++] without the IBH Net driver. |
The PC is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a SIMATIC® S5 station on the AS511 port. Communication parameters were configured uisng the web interface or by the IBHNet configuration tool. | The PC is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a SIMATIC® S5 station on the AS511 port. Communication parameters were configured uisng the web interface or by the IBHNet configuration tool. | ||
| Line 7: | Line 7: | ||
== Software requirements == | == Software requirements == | ||
| − | * S5 for | + | * S5 for Windows® > V6.x |
* IBH link S5++ with firmware V1.48 | * IBH link S5++ with firmware V1.48 | ||
Revision as of 16:53, 4 December 2012
The text below describes the connection of S5 for Windows® to a SIMATIC® S5 using the IBHLink S5++ without the IBH Net driver.
The PC is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a SIMATIC® S5 station on the AS511 port. Communication parameters were configured uisng the web interface or by the IBHNet configuration tool.
In our sample the IP address of the IBH Link S5++ is set to 192.168.0.156.
Software requirements
- S5 for Windows® > V6.x
- IBH link S5++ with firmware V1.48
Within the Onlinetree seclet <Network> and choose <New S5-TCP/IP Station..> using the right mosue button:
Within the field <IP-Address> enter the IP-Address of the IBH Link S5++.
As protocol <RFC1006> is choosen.
Now the onnline connection can be established:
