OPCServer:Create Variables with Intouch FS Gateway

Create Variables with Intouch FS Gateway

To create Variables with Intouch FS Gateway with Intouch, please follow the description step by step.

• Start the ArchestrA System Management Console

Start ⇒ Programme ⇒ Wonderware ⇒ System Management Console

• Add a OPC Node via <Add OPC Object> with the name IBH:

As <Server Node> enter the IP Address of the PC , where the IBH OPC Server is running:

As <Server Name> choose the IBH OPC Server:

• Add a OPC Group with the name OPC_Server:

Within the filed <OPC Item ID Prefix> the name of the PLC can be entered, which was created within IBH OPC Editor f.e. PLC1 followed by a dot.

So the notation <Access-path> within the later <Item> creation can be omitted.

• Start the Intouch WindowMaker and create a new Acess name f.e. IBH_OPC :

As <Node name> enter the IP Address of the PC , where the IBH OPC Server is running:

As <Application name> enter FSGateway.

The <Topic-Name> is the combination of Node name IBH and OPC Group name OPC_Server.

• Now the Tagnamess can be created:

Select the newly created Access Name: IBH_OPC.

The entry <Item> consists of:

<Access-Path>.<Item Name>.

The <Access-Path> represents the name of the <PLC>, which has been created in the IBH OPC Editor.

The <Access-Path> is not necessary in our sample, because it is aready defined within <OPC Item ID Prefix> .

To access the variables which are already defined within the IBH OPC Editor the correct syntax is:

Generic.<Variable Name>

• The configuration is now completed and the variables can be used: