Difference between revisions of "S7-PCI315:Changing the Battery"
From IBHsoftec Wiki English
(Created page with " {| class="wikitable" |- | Electrical Shock Hazard WARNING! || ''' Electrical Shock Hazard ''' * Disconnect the PC from mains and make su...") |
(No difference)
|
Latest revision as of 13:29, 6 August 2012
WARNING! | Electrical Shock Hazard
|
1. Pull off the power plug of your PC.
2. Open the housing of your PC.
3. Unmount the S7-PCI315 PLC.
4. Pull out the S7-PCI315 PLC from the card slot of your PC.
5. Remove Battery
- To remove the battery from its battery holder move it sidewards.
6. Insert Battery
- Use a fully charged Battery.
- Pay attention to the polarity of the Battery. In the picture below the positive pole is on top.
- To insert the Battery shift it, ensuring the correct polarity, into the battery holder.
7. Plug in the S7-PCI315 PLC into a free PCI card slot.
8. Fix the S7-PCI315 PLC at the designated drilling hole.
9. Close the PC housing.
10. Reconnect the PC to the mains power and switch it on.