Difference between revisions of "IBHNet:Introduction"
From IBHsoftec Wiki English
(Created page with " With the '''''IBHNet''''' driver for the '''''IBH Link''''', the '''''S7-SoftPLC''''' and '''''S7-CX''''' PLC, controllers can be easily programmed and maintained via etherne...") |
|||
| Line 13: | Line 13: | ||
* An IBH''softec'' '''''S7-PCI315''''', connected via a local area network, via an Intranet or via the Internet. | * An IBH''softec'' '''''S7-PCI315''''', connected via a local area network, via an Intranet or via the Internet. | ||
* An IBH''softec'' '''''S7-CX''''' PLC, connected via a local area network, via an Intranet or via the Internet. | * An IBH''softec'' '''''S7-CX''''' PLC, connected via a local area network, via an Intranet or via the Internet. | ||
| − | * Any Simatic<sup>®</sup> S7-200<sup>®</sup>, S7-1200<sup>®</sup>, S7-300<sup>®</sup> or S7-400<sup>®</sup> PLCs, connected via a local area network, via an Intranet or via the Internet. To establish a connection of a Simatic<sup>®</sup> S7-200<sup>®</sup>, S7-300<sup>®</sup> or S7-400<sup>®</sup> PLC with the ethernet network, the communication adaptor '''''IBH Link''''' is required. | + | * Any Simatic<sup>®</sup> S7-200<sup>®</sup>, S7-1200<sup>®</sup>, S7-1500<sup>®</sup>, S7-300<sup>®</sup> or S7-400<sup>®</sup> PLCs, connected via a local area network, via an Intranet or via the Internet. To establish a connection of a Simatic<sup>®</sup> S7-200<sup>®</sup>, S7-300<sup>®</sup> or S7-400<sup>®</sup> PLC with the ethernet network, the communication adaptor '''''IBH Link''''' is required. |
* Simatic<sup>®</sup> S5 PLCs, connected via a local area network, via an Intranet or via the Internet. To establish a connection of a Simatic<sup>®</sup> S5 PLC with the ethernet network, the communication adaptor '''''IBH Link S5''''' is required. | * Simatic<sup>®</sup> S5 PLCs, connected via a local area network, via an Intranet or via the Internet. To establish a connection of a Simatic<sup>®</sup> S5 PLC with the ethernet network, the communication adaptor '''''IBH Link S5''''' is required. | ||
Latest revision as of 12:48, 9 April 2013
With the IBHNet driver for the IBH Link, the S7-SoftPLC and S7-CX PLC, controllers can be easily programmed and maintained via ethernet using the TCP/IP protocol. Besides programming and variable access, also monitoring the block status of the controller is possible via the IBHNet driver.
The IBHNet driver can be used in conjunction with S5/S7 for Windows®, with the IBH OPC Server, Simatic® STEP®7 an other applications. Also, the IBHNet driver enables you to gain a direct variable access via standard programming languages like Visual Basic or Delphi.
The following PLC controllers can be accessed with the IBHNet driver:
- An IBHsoftec S7-SoftPLC, operated on the same PLC.
- An IBHsoftec S7-SoftPLC, connected via a local area network, via an Intranet or via the Internet.
- An IBHsoftec S7-PCI315, operated in the same PLC.
- An IBHsoftec S7-PCI315, connected via a local area network, via an Intranet or via the Internet.
- An IBHsoftec S7-CX PLC, connected via a local area network, via an Intranet or via the Internet.
- Any Simatic® S7-200®, S7-1200®, S7-1500®, S7-300® or S7-400® PLCs, connected via a local area network, via an Intranet or via the Internet. To establish a connection of a Simatic® S7-200®, S7-300® or S7-400® PLC with the ethernet network, the communication adaptor IBH Link is required.
- Simatic® S5 PLCs, connected via a local area network, via an Intranet or via the Internet. To establish a connection of a Simatic® S5 PLC with the ethernet network, the communication adaptor IBH Link S5 is required.
