S7-SoftPLC:Add/remove drivers

From IBHsoftec Wiki English
Revision as of 13:45, 19 December 2012 by Jonas (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Konf Treiber.png

Here the hardware drivers for S7-SoftPLC can be added/removed.

The available drivers are listed one the left side, the drivers currently assigned to S7-SoftPLC on the right side.


Add drivers

Select a driver for S7-SoftPLC.

Activate the ">>"-button and the highlighted driver moves to the right area (Selected drivers) and is therefore added to S7-SoftPLC.

After a restart of S7-SoftPLC the driver is now available.


Remove drivers

Remove a driver from the S7-SoftPLC configuration.

Activate the "<<"-button and the highlighted driver moves to the left area (Available drivers) and is therefore removed from S7-SoftPLC. The drivers may again be added to S7-SoftPLC at any time.

After a restart of S7-SoftPLC the driver is not available any more.


WARNING: IF A DRIVER WITH NON AVAILABLE HARDWARE IS SELECTED, FAILURES OF S7-SOFTPLC CAN OCCUR.

Retrieved from "https://wiki.ibhsoftec.com/en/index.php?title=S7-SoftPLC:Add/remove_drivers&oldid=992"