IBH Link IoT:Startup operations
Mounting and Connection
The IBH Link IoT is designed for DIN rail mount:
ATTENTION!
The IBH Link IoT requires a 12 - 36V DC power supply. Higher voltages may destroy the device. Pay attention to polarity.
Power supply: 24VDC / 0,2A
Configuration of the IP addresses
The administration can be made with a recent web browser over the Ethernet port 1 by using the host name http://ibhlink-iot_<serial number> (f.i. http://ibhlink-iot_000161)
or over the ports 2-4 by entering the default IP Address 192.168.1.14
On the PC the IBHNet-Iot driver is required. The Driver is available free of charge.
Default IP Address configuration:
| Level | Port | Address |
|---|---|---|
| Management level | Port 1 | Host name: ibhlink-iot_<serial number> |
| Control level | Port 2 - 4 | 192.168.1.14 |
Default Login:
admin
admin
Network: Management Level
Network configuration for Port 1 (Management level respectively Supervision Level):
Network: Control Level
Network configuration for Port 2 - 4 (Control Level respectively Machine Level):
Assigment Token
After logging in to the “”'TeamViewer Remote page, once the rollout configuration has been completed, the Assignment Token or the ID can be copied:
The token or ID is then copied into the Assignment Token field and assigned:
IBH Net IoT Port Forwarding
Once the IBH Link Iot has been connected, TeamViewer Port Forwarding can be set up:
Once the allocation in IBH Link IoT has been completed::
The TemaViewer port forwarding can be started as follows:
In the example, port forwarding has been set up for a Remote Desktop connection (port 3389) and for accessing a Siemens PLC via the IBH Link S7++ on port 102.
As TIAPortal and Step®7 do not allow the entry of localhost (127.0.0.1), a free IP address must be assigned, which is then entered as the access address for online access.
Example: Path in S5/S7AI for Windows®:
Important Note:
If the TeamViewer VPN Tunnel is successfully activated, it will appear under Network Connections
The properties of the TCP/IPv4 address must remain set to DHCP!