IBHLink S5++:SIMATIC® S5 for Windows®

From IBHsoftec Wiki English
Revision as of 10:34, 19 September 2013 by Harald (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The text below describes the connection of S5 for Windows® to a SIMATIC S5 using the IBHLink S5++ without the IBH Net driver.

The PC is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a SIMATIC S5 station on the AS511 port. Communication parameters were configured uisng the web interface or by the IBHNet configuration tool.

In our sample the IP address of the IBH Link S5++ is set to 192.168.0.156.

Software requirements

  • S5 for Windows® > V6.x
  • IBH link S5++ with firmware V1.48

Within the Onlinetree seclet <Network> and choose <New S5-TCP/IP Station..> using the right mosue button:

S5 TCP New Station.png

S5 TCP Station eng.png

Within the field <IP-Address> enter the IP-Address of the IBH Link S5++.

As protocol <RFC1006> is choosen.

Now the onnline connection can be established:

S5 TCP Access.png

Retrieved from "https://wiki.ibhsoftec.com/en/index.php?title=IBHLink_S5%2B%2B:SIMATIC®_S5_for_Windows®&oldid=1484"