S7-PCI315:Instruction set

S7-PCI315 instruction set

The S7-PCI315 PLC has the complete instruction set of the SIMATIC® S7-315 PLC.

Bit logic instructions

Instruction	Operand	Description
A		AND with a scan to "1"
AN		AND with a scan to "0"
O		OR with scan to "1"
ON		OR with scan to "0"
X		Exclusive-OR with a scan to "1"
XN		Exclusive-OR with a scan to "0"
	I	of an input
	Q	of an output
	M	of a memory flag
	L	of a local data bit
	T	of a timer
	C	of a counter
	DBX	of a data bit
	DIX	of an instance data bit
==0		result equal zero
<>0		result unequal zero
>0		result greater than zero
>=0		result greater or equal zero
<0		result less than zero
<=0		result less or equal zero
UO		invalid result
OV		overflow
OS		Überoverflow (saved)
BR		binary result

Other boolean logic instructions

Operation	Operand	Description
A(		AND left parenthesis
AN(		AND NOT left parenthesis
O(		OR left parenthesis
ON(		OR NOT left parenthesis
X(		Exclusive OR left parenthesis
XN(		Exclusive OR NOT left parenthesis
)		Right parenthesis
O		OR-ing AND operations
NOT		Negate RLO
SET		Set RLO to "1"
CLR		Set RLO to "0"
SAVE		Save RLO to the BR bit

Operation	Operand	Description
=		Assign value of RLO
S		Set
R		Reset
FP		Positive edge detection
FN		Negative edge detection
	I	of an input bit
	Q	of an output bit
	M	of a flag memory bit
	L	of a local data bit
	DBX	of a data bit
	DIX	of an instance data bit

Master Control Relay

Operation	Operand	Description
MCRA		Activate MCR
MCRD		Deactivate MCR
MCR(		Open MCR zone
)MCR		Close MCR zone

Load / Transfer instructions

Operation	Operand	Description
L		Load operand
T		Transfer operand
	IB	InpuInput byte
	IW	Input word
	ID	Input double word
	QB	Output byte
	QW	Output word
	QD	Output double word
	MB	Memory byte
	MW	Memory word
	MD	Memory double word
	LB	Local data byte
	LW	Local data word
	LD	Local data double word
	DBB	Data block byte
	DBW	Data block word
	DBD	Data block double word
	DIB	Instance data block byte
	DIW	Instance data block word
	DID	Instance data block double word
	STW	Status word
L	Const	Load constant value
L	#Pointer	Load pointer
L	T	Timer
LC	T	Timer (BCD coded)
L	C	Counter
LC	C	Counter (BCD coded)
L	DBNO	Data block number
L	DBLG	Data block length
L	DINO	Instance data block number
L	DILG	Instance data block length

Peripheral access instructions

Operation	Operand	Description
L	PIB	Load peripheral input byte
L	PIW	Load peripheral input word
L	PID	Load peripheral input double word
T	PQB	Transfer peripheral output byte
T	PQW	Transfer peripheral output word
T	PQD	Transfer peripheral output double word

Accumulator instructions

Operation	Operand	Description
PUSH		Push accumulators upwards
POP		Push accumulators downwards
ENT		Push accumulators (without A1) A2->A3, A3->A4
LEAVE		Push accumulators (without A1) A4->A3, A3->A2
TAK		Change ACCU1 with ACCU2
CAW		Change ACCU1 bytes 0 and 1
CAD		Change ACCU1 bytes 0 and 3, 1 and 2

Shift and rotating instructions

Operation	Operand	Description
SLW		Shift ACCU1-L left (word shift)
SLD		Shift ACCU1 left (double word shift)
SRW		Shift ACCU1-L right (word shift)
SRD		Shift ACCU1 right (double word shift)
SSI		Shift ACCU1-L right (word shift with sign)
SSD		Shift ACCU1 right (double word shift with sign)
RLD		Rotate ACCU1 left (double word)
RLDA		Rotate ACCU1 left through CC1
RRDA		Rotate ACCU1 right through CC1
RRD		Rotate ACCU1 right (double word)
	Const	Number of places to shift/rotate
		Number of places to shift/rotate located in ACCU2

Timer instructions

Operation	Operand	Description
SP	T	Start as impulse
SE	T	Start as extended impulse
SD	T	Start as ON-delay
SS	T	Start as saving ON-delay
SF	T	Start as OFF-delay
R	T	Reset timer
FR	T	Enable timer

Counter instructions

Operation	Operand	Description
CU	C	Count up (increment)
CD	C	Count down (decrement)
S	C	Set counter
R	C	Reset counter
FR	C	Enable counter

Word instructions

Operation	Operand	Description
AW		AND ACCU1-L (AND word)
AD		AND ACCU1 (AND double word)
OW		OR ACCU1-L (OR word)
OD		OR ACCU1 (OR double word)
XOW		Exclusive-OR ACCU (XOR word)
XOD		ExkExclusive-OR ACCU (XOR double word)
	Const	with a word or double word constant
		with ACCU2

Arithmetic instructions

Operation	Operand	Description
==I		Integer values equal
<>I		Integer values unequal
>I		Integer values greater
>=I		Integer values greater or equal
<I		Integer values less
<=I		Integer values less or equal
==D		Double integer values equal
<>D		Double integer values unequal
>D		Double integer values greater
>=D		Double integer values greater or equal
<D		Double integer values less
<=D		Double integer values less or equal
==R		Real values equal
<>R		Real values unequal
>R		Real values greater
>=R		Real values greater or equal
<R		Real values less
<=R		Real values less or equal
SIN		Sine of a real value
COS		Cosine of a real value
TAN		Tangent of a real value
ASIN		Arcsine of a real value
ACOS		Arccosine of a real value
ATAN		Arctanget of a real value
SQR		Square a real value
SQRT		Square root a real value
EXP		e to the power of a real value
LN		Natural logarithm of a real value
+I		Integer addition
-I		Integer subtraction
*I		Integer multiplication
/I		Integer division
+D		Double-integer addition
-D		Double-integer subtraction
*D		Double-integer multiplication
/D		Double-integer division
+R		Real addition
-R		Real subtraction
*R		Real multiplication
/R		Real division
MOD		Double integer division (modulo)
+	Const	Add a constant
+P#	Const	Add a pointer
DEC		decrement ACCU1-LL (one byte)
INC		increment ACCU1-LL (one byte)

Data type conversion instructions

Operation	Operand	Description
ITD		Convert integer to double integer
ITB		Convert integer to BCD
DTB		Convert double integer to BCD
DTR		Convert double integer to real
BTI		Convert BCD to integer
BTD		Convert BCD to double integer
RND		Convert real to double integer (round)
RND+		Convert real to double integer (round up)
RND-		Convert real to double integer (round down)
TRUNC		Convert real to double integer (truncate)
INVI		Invert ACCU1-L (integer)
INVD		Invert ACCU1 (double integer)
NEGI		Negate ACCU1-L (integer)
NEGD		Negate ACCU1 (double integer)
NEGR		Negate ACCU1 (real)
ABS		REAbsolute value (real)

Jump instructions

Operation	Operand	Description
JU	Destination	Jump unconditional
JC	Destination	Jump if RLO = 1
JCB	Destination	Jump if RLO = 1 (save RLO)
JCN	Destination	Jump if RLO = 0
JNB	Destination	Jump if RLO = 0 (save RLO)
JBI	Destination	Jump if BR = 1
JNBI	Destination	Jump if BR = 0
JZ	Destination	Jump if compare result = 0
JN	Destination	Jump if compare result ≠ 0
JP	Destination	Jump if compare result > 0
JPZ	Destination	Jump if compare result >= 0
JM	Destination	Jump if compare result < 0
JMZ	Destination	Jump if compare result <= 0
JUO	Destination	Jump if compare result "Unordered Math Instruction"
JO	Destination	Jump on overflow
JOS	Destination	Jump on saved overflow
JL	Destination	Jump distributor
LOOP	Destination	Loop programming (decrement ACCU1-L and jump if ≠ 0

Block call instructions

Operation	Operand	Description
CALL FB		Unconditional call of an FB with parameter transfer
CALL FC		Unconditional call of an FC with parameter transfer
CALL SFB		Unconditional call of an SFB with parameter transfer
CALL SFC		Unconditional call of an SFC with parameter transfer
UC FB		Unconditional call of an FB without parameter transfer
CC FB		Conditional call of an FB without parameter transfer
UC FC		Unconditional call of an FC without parameter transfer
CC FC		Conditional call of an FC without parameter transfer
BEU		End block unconditionally
BEC		End block conditionally (RLO = 1)
BE		End block
OPN	DB	Open data block
	DI	Open instance data block
TDB		Exchange data block registers

Indirect adressing instructions

Operation	Operand	Funktionsbeschreibung
LAR1		Load AR1
LAR2		Load AR2
	MD	with memory double word
	LD	with local data double word
	DBD	with datablock double word
	DID	with instance data block double word
LAR1		Load AR1 with ACCU1
LAR2		Load AR2 with ACCU1
LAR1	AR2	Load AR1 with AR2
LAR1	P#	Load AR1 with pointer
LAR2	P#	Load AR2 with pointer
TAR1		Transfer in AR1
TAR2		Transfer in AR2
	MD	in memory double word
	LD	in local data double word
	DBD	in datablock double word
	DID	in instance data block double word
TAR1		Transfer AR1 in ACCU1
TAR2		Transfer AR2 in ACCU1
TAR1	AR2	Transfer AR1 in AR2
TAR		Swap AR1 with AR2
+AR1		Add ACCU1 to AR1
+AR2		Add ACCU1 to AR2
+AR1	P#	Add pointer to AR1
+AR2	P#	Add pointer to AR2

Program display and null operation instructions

Operation	Operand	Funktionsbeschreibung
NOP	0	Null operation instruction
NOP	1	Null operation instruction
BLD	Const	Program display instruction (null operation)