IBHLink S5++:SIMATIC® S5 for Windows®: Difference between revisions
Jump to navigation
Jump to search
Created page with "The text below describes the usage of S5 for Windows It is possible to realize a connection from a TIA Portal V11 WinCC flexible Runtime/Panel to a SIMATIC® S5 station over ..." |
No edit summary |
||
| Line 1: | Line 1: | ||
The text below describes the | The text below describes the connection of S5 for Windows to a SIMATIC® S5 using the [http://www.ibhsoftec.com/IBH-Link-S5-PP-Eng IBHLink S5++] without the IBH Net driver. | ||
The PC is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a SIMATIC® S5 station on the AS511 port. Communication parameters were configured uisng the web interface or by the IBHNet configuration tool. | |||
In our sample the IP address of the IBH Link S5++ is set to 192.168.0.156. | |||
== Software requirements == | == Software requirements == | ||
* S5 for Windows > V6.x | * S5 for Windows > V6.x | ||
* IBH link S5++ with firmware V1.48 | * IBH link S5++ with firmware V1.48 | ||
Revision as of 09:36, 19 November 2012
The text below describes the connection of S5 for Windows to a SIMATIC® S5 using the IBHLink S5++ without the IBH Net driver. The PC is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a SIMATIC® S5 station on the AS511 port. Communication parameters were configured uisng the web interface or by the IBHNet configuration tool.
In our sample the IP address of the IBH Link S5++ is set to 192.168.0.156.
Software requirements
- S5 for Windows > V6.x
- IBH link S5++ with firmware V1.48