Difference between revisions of "IBH Link UA:Configuration with IBH OPC Editor"
From IBHsoftec Wiki English
(Created page with "== Configuration with IBH OPC Editor == Besides STEP7 or the TIA Portal the '''[http://www.ibhsoftec.com/IBH-OPC-Server-Eng IBH OPC Server]''' can be used for configuration. ...") |
|||
| Line 17: | Line 17: | ||
* SIMATIC S5 with IBH Link S5++ via S7 TCP/IP protocol | * SIMATIC S5 with IBH Link S5++ via S7 TCP/IP protocol | ||
| − | [[Image: | + | [[Image:IBH_Link_UA_IBH_Editor_Project.png|200px]] |
The operation instructions for the '''IBH OPC Editor''' can be found on our Wiki at: '''[http://wiki.ibhsoftec.com/en/Main_Page#OPC_Server IBH OPC Server]'''. | The operation instructions for the '''IBH OPC Editor''' can be found on our Wiki at: '''[http://wiki.ibhsoftec.com/en/Main_Page#OPC_Server IBH OPC Server]'''. | ||
Latest revision as of 16:41, 10 April 2015
Configuration with IBH OPC Editor
Besides STEP7 or the TIA Portal the IBH OPC Server can be used for configuration.
After installation the IBH OPC Editor is avilable for free in combination with the IBH Link UA.
The following protocols are supported:
- S7 300/400 TCP/IP
- S7 200 TCP/IP
- S7 1200 TCP/IP
- S7 1500 TCP/IP
- SIMATIC S5 with IBH Link S5++ via S7 TCP/IP protocol
The operation instructions for the IBH OPC Editor can be found on our Wiki at: IBH OPC Server.
Within the mnenu OPC Slots the OPC Editor File can be loaded:
All PLC with supported protocols will be listed:
After the OPC Editor file was donwloaded successfully the different PLC and their variables are listed within the menu OPC Slots:
