Difference between revisions of "IBH USB-S5-Adapter:SIMATIC® S5 for Windows®"

Revision as of 13:20, 5 December 2012

The text below describes the connection of S5 for Windows® Version 7 to a SIMATIC® S5 using the IBH-USB-S5-Adapter.

The PC is connected to a SIMATIC® S5 station via the IBH-USB-S5-Adapter on the AS511 port.

The IBH USB-S5-Adapter needs to be installed correctly . This can be controled within Device Manager.

<Start><Control Panel><All Control Panel Items><System><Device Manager>

There the entry <USB Serial Port> must appear.

Within the Onlinetree select USB Serial Port:

Using the right mosue button you'll get to the settings:

Choose as <Protocol> S5-AS511 with <Baud rate> 9600.

Now the onnline connection can be established:

Revision as of 13:18, 5 December 2012 (view source) Axel (Talk \| contribs) ← Older edit		Revision as of 13:20, 5 December 2012 (view source) Axel (Talk \| contribs) Newer edit →
Line 1:		Line 1:
−	The text below describes the connection of S5 for Windows® Version ~~7to~~ a SIMATIC® S5 using the [http://www.ibhsoftec.com/IBH-USB-S5-Adapter-Eng IBH-USB-S5-Adapter].	+	The text below describes the connection of S5 for Windows® Version 7 to a SIMATIC® S5 using the [http://www.ibhsoftec.com/IBH-USB-S5-Adapter-Eng IBH-USB-S5-Adapter].

	The PC is connected to a SIMATIC® S5 station via the IBH-USB-S5-Adapter on the AS511 port.		The PC is connected to a SIMATIC® S5 station via the IBH-USB-S5-Adapter on the AS511 port.