IBH Link UA:Mitsubishi PLC: Difference between revisions

Revision as of 11:38, 8 September 2026

For the Mitsubishi control to be accessible via OPC UA, the SLMP Connection module must be inserted with the GX Works configuration software:

The settings for “”'Opening Method'“” must be set to “”'Do not Open by Program

Within the IBH OPC UA Editor a new Mitsubishi configuration is added:

As next step the appropriate CPU is created:

To create variables, a structure must be defined:

Then the desired variables can be created:

@@ Line 4: / Line 4: @@
-[[Image:IBH_Link_UA_Mitsubishi_Opening_Method.png|511px]]
+[[Image:IBH_Link_UA_Mitsubishi_External_Device.png|783px]]
+The settings for “”'Opening Method'“” must be set to “”'Do not Open by Program'''
-[[Image:IBH_Link_UA_Mitsubishi_External_Device.png|783px]]
+[[Image:IBH_Link_UA_Mitsubishi_Opening_Method.png|511px]]