Difference between revisions of "S5/S7 for Windows:USB Prommer Driver"
(→Installation of the libusb driver with already installed Siemens driver) |
|||
| Line 10: | Line 10: | ||
'''Siemens driver for the USB-Prommer is ''already'' installed on the PC:''' | '''Siemens driver for the USB-Prommer is ''already'' installed on the PC:''' | ||
| − | [[Image: | + | [[Image:System_with_driverr.png]] |
'''Siemens driver for the USB-Prommer is ''not'' installed on the PC:''' | '''Siemens driver for the USB-Prommer is ''not'' installed on the PC:''' | ||
| − | [[Image: | + | [[Image:System_no_driverr.png]] |
==Installation of the libusb driver '''with''' already installed Siemens driver== | ==Installation of the libusb driver '''with''' already installed Siemens driver== | ||
| Line 22: | Line 22: | ||
After the start of the Setup the option '''Install a device filter''' must be chosen. | After the start of the Setup the option '''Install a device filter''' must be chosen. | ||
| − | [[Image: | + | [[Image:Libusb_filter_driver.png]] |
After installation the '''libusb-win32 filter installer''' needs to be started. Within this program the entry for the USB-Prommer must be selected and the button '''Install''' msut be pressed. | After installation the '''libusb-win32 filter installer''' needs to be started. Within this program the entry for the USB-Prommer must be selected and the button '''Install''' msut be pressed. | ||
| − | [[Image: | + | [[Image:Libusb_device_selection.png]] |
The successful installation is indicated by the following message: | The successful installation is indicated by the following message: | ||
| − | [[Image: | + | [[Image:Libusb_success.png]] |
The dialog can be closed. The installation is completed and the USB-Prommer can be used within S5/S7 for Windows®. | The dialog can be closed. The installation is completed and the USB-Prommer can be used within S5/S7 for Windows®. | ||
| − | ==Installation of the libusb driver '''without''' | + | ==Installation of the libusb driver '''without''' installed Siemens driver== |
In this case the '''ZAdik Device Treiber''' must be installed. | In this case the '''ZAdik Device Treiber''' must be installed. | ||
| Line 45: | Line 45: | ||
The '''libsub-win32 (v1.2.6.0)''' must also be selected when using 64 bit operating systems! | The '''libsub-win32 (v1.2.6.0)''' must also be selected when using 64 bit operating systems! | ||
| − | [[Image: | + | [[Image:Prommer driver.png]] |
Revision as of 14:17, 15 May 2014
Contents
Driver support for the USB-Prommer
S5/S7 for Windows ® supports the libusb driver which allows the operation of the Siemens USB-Prommer (6ES7 792-0AA00-0XA0) under current operating systems. Depending on whether the original Siemens driver for the USB-Prommer is already installed on the PC, the libusb driver must be installed in two different ways.
Check whether the Siemens USB-Prommer driver is installed
If the USB-Prommer is connected to the PC within the device manager can be checked whether the Siemens USB-Prommer driver is installed.
Siemens driver for the USB-Prommer is already installed on the PC:
Siemens driver for the USB-Prommer is not installed on the PC:
Installation of the libusb driver with already installed Siemens driver
In this case the libusb-win32 filter driver must be installed. This allows a control of the USB prommer parallel to the already installed Siemens driver, without impairing its function.
After the start of the Setup the option Install a device filter must be chosen.
After installation the libusb-win32 filter installer needs to be started. Within this program the entry for the USB-Prommer must be selected and the button Install msut be pressed.
The successful installation is indicated by the following message:
The dialog can be closed. The installation is completed and the USB-Prommer can be used within S5/S7 for Windows®.
Installation of the libusb driver without installed Siemens driver
In this case the ZAdik Device Treiber must be installed.
When using the operating system Windows XP the setup with the file namezadig_xp_2.1.0.exe must be started. When using the operating system VISTA, Windows 7 or Windows 8 the Setup with the file namezadig_2.1.0.exe must be started.
After installation the ZAdik Device Driver will be started. Within this program the entry for the USB-Prommer and the driver libsub-win32(v1.2.6.0)must be selected and the button Install msut be pressed.
The libsub-win32 (v1.2.6.0) must also be selected when using 64 bit operating systems!
The dialog can be closed. The installation is completed and the USB-Prommer can be used within S5/S7 for Windows®.
Using the Siemens driver without libusb driver
Caution: The supplied driver (10/2007) can only be installed on 32-bit systems. Newer versions of the driver only have support for S7 memory modules.
