Difference between revisions of "IBHLink S5++:Network configuration via USB"
From IBHsoftec Wiki English
| Line 12: | Line 12: | ||
After the successfull driver installation Windows detects an additional network card. This network card needs no configuration. The network configuration is accesible by entering the following IP-Address in the address bar of the browser:<br> | After the successfull driver installation Windows detects an additional network card. This network card needs no configuration. The network configuration is accesible by entering the following IP-Address in the address bar of the browser:<br> | ||
[http://192.168.167.12 http://192.168.167.12] <br> | [http://192.168.167.12 http://192.168.167.12] <br> | ||
| + | |||
| + | [[File:S5Linkstart.png]] | ||
Revision as of 14:09, 28 January 2014
Network configuration via USB
Beside the configuration via Ethernet, the IBH Link S5++ can be configured via USB.
The IBH Link must be connected to the PC with an USB cable (not included in the product IBH Link S5++). The power is not provided by the USB cable. The required driver can be downloaded here:
http://download.ibhsoftec.com/Customer/eth20-usb-win.zip
The driver has no digital Windows signature. It may be necesarry to prepare the operating system to accept such drivers.
After the successfull driver installation Windows detects an additional network card. This network card needs no configuration. The network configuration is accesible by entering the following IP-Address in the address bar of the browser:
http://192.168.167.12
