Difference between revisions of "IBHLink S7++:Time Synchronisation with NetPro"

From IBHsoftec Wiki English
Jump to: navigation, search
(Created page with " Projected Time Synchronisation with [http://www.ibhsoftec.com/IBH-Link-S7-PP-Eng IBHLink S7++] or [http://www.ibhsoftec.com/IBH-Link-S7-PP-HS-Eng IBHLink S7++ HS]. ==Proje...")
 
(→‎Projected Time Synchronisation with NetPro)
 
(6 intermediate revisions by one other user not shown)
Line 4: Line 4:
 
Projected Time Synchronisation with [http://www.ibhsoftec.com/IBH-Link-S7-PP-Eng IBHLink S7++] or [http://www.ibhsoftec.com/IBH-Link-S7-PP-HS-Eng IBHLink S7++ HS].
 
Projected Time Synchronisation with [http://www.ibhsoftec.com/IBH-Link-S7-PP-Eng IBHLink S7++] or [http://www.ibhsoftec.com/IBH-Link-S7-PP-HS-Eng IBHLink S7++ HS].
  
−
==Projected Time Synchronisation with==
+
==Projected Time Synchronisation with NetPro==
 
Within IBH Link setting Routing has to be activated :
 
Within IBH Link setting Routing has to be activated :
  
Line 10: Line 10:
  
  
−
Der IBHLink S7++ / IBH Link S7++HS wird als Station in NetPro angelegt und über MPI bzw. Profibus mit der entsprechenden Steuerung vernetzt.
+
The IBHLink S7++ / IBH Link S7++HS is engineered as PLC station in NetPro and networked via MPI
−
MLFB: 6ES7 412-2EK06-0AB0 V6.0 in Rack 0, Steckplatz 2
+
or Profibus with the PLC.
 +
 
 +
MLFB: 6ES7 412-2EK06-0AB0 V6.0 Rack 0, Slot 2
  
 
[[Image:Netpro.png‎|529px]]
 
[[Image:Netpro.png‎|529px]]
  
−
Die MPI/Profibusadresse muss der MPI/Profibusadresse des IBHLink S7++ / IBHLink S7++HS entsprechen:
+
The IP and MPI/Profibus addresses need to be set equal to the addresses within the IBH Link S7++ / S7++ HS.
−
 
+
−
[[Image:MPI_Adresse.png‎|537px]]
+
−
 
+
  
−
Als IP-Adresse wird die Adresse des IBHLink S7++ / IBH Link S7++HS eingestellt:
+
[[Image:MPI_Address.png‎|537px]]
  
−
[[Image:Ethernetadresse.png‎‎|548px]]
+
[[Image:Ethernet_address.png‎‎|548px]]
  
−
Stellen Sie sicher, dass der angegebene NTP(Network Time Protocol) Server erreichbar ist:
+
The selected  NTP(Network Time Protocol) Server must be reachable.
  
−
[[Image:NTP_Adresse.png‎|548px]]
+
[[Image:NTP_Address.png‎|548px]]
  
  
−
Die Synchronisation muss <auf MPI> als Master aktiviert werden:
+
Set the Synchronisation <On the MPI> to Master:
  
−
[[Image:Uhr_Master.png‎|537px]]
+
[[Image:Clock_Master.png‎|537px]]
  
−
In der angeschlossenen CPU muss die Uhrsynchronisation wie folgt eingestellt werden:
+
Within the properties of the networked PLC you have to set up the synchronisation as follows:
  
−
[[Image:SCPU_Slave.png‎|537px]]
+
[[Image:Clock_Slave.png‎|537px]]
  
−
Die Projektierung wird in den IBH Link S7++/ IBH Link S7++HS und in die angeschlossene(n) CPU(s) geladen:
+
The Network project needs to be loaded in the IBH Link S7++/ IBH Link S7++HS and the networked PLC:
  
−
[[Image:Station_laden.png‎|761px]]
+
[[Image:Download_stations.png‎|656px]]

Latest revision as of 12:51, 19 September 2013


Projected Time Synchronisation with IBHLink S7++ or IBHLink S7++ HS.

Projected Time Synchronisation with NetPro

Within IBH Link setting Routing has to be activated :

IBH Link Routing eng.png


The IBHLink S7++ / IBH Link S7++HS is engineered as PLC station in NetPro and networked via MPI or Profibus with the PLC.

MLFB: 6ES7 412-2EK06-0AB0 V6.0 Rack 0, Slot 2

Netpro.png

The IP and MPI/Profibus addresses need to be set equal to the addresses within the IBH Link S7++ / S7++ HS.

MPI Address.png

Ethernet address.png

The selected NTP(Network Time Protocol) Server must be reachable.

NTP Address.png


Set the Synchronisation <On the MPI> to Master:

Clock Master.png

Within the properties of the networked PLC you have to set up the synchronisation as follows:

Clock Slave.png

The Network project needs to be loaded in the IBH Link S7++/ IBH Link S7++HS and the networked PLC:

Download stations.png

Retrieved from "https://wiki.ibhsoftec.com/en/index.php?title=IBHLink_S7%2B%2B:Time_Synchronisation_with_NetPro&oldid=1499"