Difference between revisions of "S7-PCI315:Service configuration"
(→Serial number) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 4: | Line 4: | ||
'''NOTE''': IF THE CONFIG FILE (S7-PCI300.INI) IS NOT EXISTANT OR NO INSTALLED BOARD IS CONFIGURED, THE FIRST FOUND DEVICE IS CONFIGURED FOR SLOT 2 FOR PU ACCESS. ADDITIONALLY A LOG MESSAGE IS LISTED IN THE USER INTERFACE. | '''NOTE''': IF THE CONFIG FILE (S7-PCI300.INI) IS NOT EXISTANT OR NO INSTALLED BOARD IS CONFIGURED, THE FIRST FOUND DEVICE IS CONFIGURED FOR SLOT 2 FOR PU ACCESS. ADDITIONALLY A LOG MESSAGE IS LISTED IN THE USER INTERFACE. | ||
| − | [[ | + | [[S7-PCI315:Configuration user interface|Service configuration by user interface (Windows 2000/XP/VISTA(32Bit)/Windows 7(32Bit))]] |
| − | [[ | + | [[S7-PCI315:Configuration INI file|Service configuration via config file S7-PCI300.INI]] |
=== Serial number === | === Serial number === | ||
Latest revision as of 09:13, 6 August 2012
The service/daemon must be configured. The slot number of a PLC rack must be assigned to a physical S7-PCI315 in the PC. This way it is known, which slot number will be routed to which board.
NOTE: IF THE CONFIG FILE (S7-PCI300.INI) IS NOT EXISTANT OR NO INSTALLED BOARD IS CONFIGURED, THE FIRST FOUND DEVICE IS CONFIGURED FOR SLOT 2 FOR PU ACCESS. ADDITIONALLY A LOG MESSAGE IS LISTED IN THE USER INTERFACE.
Service configuration by user interface (Windows 2000/XP/VISTA(32Bit)/Windows 7(32Bit))
Service configuration via config file S7-PCI300.INI
Serial number
The serial number is build by the two numbers 'DeviceNumber' and 'SerialNo'.
The serial number is printed on the box of S7-PCI315 PLC.
According to this picture the serial number 1800410-20016 is given.
The serial number is printed on a label on top of theS7-PCI315 PLC.
According to this picture the serial number 1701430-21651 is given.
The separate "4" in the numbers on the image identifies the hardware revision.
