Difference between revisions of "IBHNet:Technical Data IBH Link S5++"

From IBHsoftec Wiki English
Jump to: navigation, search
(LED-Meaning)
(LED-Meaning)
 
Line 82: Line 82:
 
| Ready || On || Device Ready
 
| Ready || On || Device Ready
 
|-
 
|-
|  || Flashing || Bootvorgang
+
|  || Flashing || Boot Process
 
|-
 
|-
 
| Busy / Error || On || Error
 
| Busy / Error || On || Error

Latest revision as of 08:32, 16 July 2012

Features

  • S5 PU Connections
  • Fetch/Write Connections
  • RFC1006 for S7 HMI devices 
  • Diagnostic LEDs
  • RJ45
  • Power supply directly from the PLC
  • Passive PLCs also possible with integrated 24V connector


Interfaces

Interface Type Factory settings
Ethernet 10/100MBPs, Auto Negotiation 192.168.1.13
USB-Device Fullspeed (12 MBits/s), Ethernet Emulation, Powered by Device 192.168.167.12
UART 20mA (TTY / Current Loop) 9600 Baud
Power supply 3.81mm, 2 Polig


D-SUB15

PIN Signal Meaning
1 GND
2 TXD-Out Open-Collector Out
3 N.C. N.C. = not connected
4 Ext. 5V-In external supply
5 N.C.
6 +3.3V
7 RXD-In
8 N.C
9 3.3V-R Connected with 3.3V over resistor 165 Ohm
10 GND
11 N.C.
12 N.C.
13 N.C.
14 N.C.
15 N.C.


LED-Meaning

LED State Meaning
LINK / ACTIVITY Flashing Activity Ethernet
SPEED On 100MBps Ethernet
FDX / COLL On Full Duplex Ethernet
Ready On Device Ready
Flashing Boot Process
Busy / Error On Error
Flashing Boot Process


PlusAchtung.gif Attention

The IBH Link S5++ only requires 24 VDC if not supplied by the PLC. The external terminal needs to be supplied with 0V, the internal terminal with 24V DC. Pay attention to polarity.

Electrical data

Parameter Min Typ Max Unit
Power supply 8 12 30 V (DC)
Power consumption 1 W
Current (USB) <20 mA
Operating temparature 0 60 °C
Storage temperature -25 75 °C
Protection IP20


Mechanical data

Parameter Min Typ Max Unit
Length 58 mm
Width 42 mm
Height 18 mm
Weight 43 g