From IBHsoftec Wiki English
Jump to navigation
Jump to search
|
|
| Line 1: |
Line 1: |
| == Configuration with IBH OPC Editor ==
| | #REDIRECT [[IBH OPC UA Editor]] |
| | |
| Besides STEP7 or the TIA Portal the '''[http://www.ibhsoftec.com/IBH-OPC-Server-Eng IBH OPC Server]''' can be used for configuration.
| |
| | |
| After installation the IBH OPC Editor is avilable for free in combination with the IBH OPC UA Server/Client.
| |
| | |
| The following protocols are supported:
| |
| | |
| * S7 300/400 TCP/IP
| |
| | |
| * S7 200 TCP/IP
| |
| | |
| * S7 1200 TCP/IP
| |
| | |
| * S7 1500 TCP/IP
| |
| | |
| * SIMATIC S5 with IBH Link S5++ via S7 TCP/IP protocol
| |
| | |
| [[Image:IBH_Link_UA_IBH_Editor_Project.png|200px]]
| |
| | |
| The operation instructions for the '''IBH OPC Editor''' can be found on our Wiki at: '''[http://wiki.ibhsoftec.com/en/Main_Page#OPC_Server IBH OPC Server]'''.
| |
| | |
| Within the mnenu '''OPC Slots''' the '''OPC Editor File''' can be loaded:
| |
| | |
| [[Image:IBH_Link_UA_Load_IBH_Editor_Project.png|803px]]
| |
| | |
| | |
| All PLC with supported protocols will be listed:
| |
| | |
| [[Image:IBH_Link_UA_IBH_Editor_Project_loading.png|803px]]
| |
| | |
| | |
| After the OPC Editor file was donwloaded successfully the different PLC and their variables are listed within the menu '''OPC Slots''':
| |
| | |
| [[Image:IBH_Link_UA_IBH_Editor_Project_loaded.png|803px]]
| |
Latest revision as of 13:37, 5 August 2026