Difference between revisions of "IBH Link UA:Configuration with STEP7"

From IBHsoftec Wiki English
Jump to: navigation, search
m (→‎STEP7 Sample: IBH Link UA with SIMATIC S5 via IBH Link S5++)
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
Configuration of the [http://www.ibhsoftec.com/IBH-Link-UA-Eng IBH Link UA] with STEP7
 
Configuration of the [http://www.ibhsoftec.com/IBH-Link-UA-Eng IBH Link UA] with STEP7
  
−
==Example==
+
==Description==
  
 
In the following example the configuration with STEP7 is shown.
 
In the following example the configuration with STEP7 is shown.
Line 80: Line 80:
  
 
'''Download: [http://download.ibhsoftec.com/german/Beispiele/IBH_Link_UA_IBH_Link_S5.zip STEP7 Sample: IBH Link UA S5]'''
 
'''Download: [http://download.ibhsoftec.com/german/Beispiele/IBH_Link_UA_IBH_Link_S5.zip STEP7 Sample: IBH Link UA S5]'''
 +
 +
SIMATIC® S5 PLC can be connected to the IBH Link UA via the '''[http://www.ibhsoftec.com/IBH-Link-S5-PP-Eng IBH Link S5++]'''
 +
 +
 +
The IBH Link S5++ will be configured as a S7-300 station within NetPro::
 +
 +
 +
[[Image:IBH_Link_UA_IBH_Link_S5_Dummy_CPU.png|391px]]
 +
 +
 +
 +
The following station can be selected:<br>
 +
 +
IM151-8 PN/DP CPU MLFB: '''6ES7 151-8AB00-0AB0 V2.7'''<br>
 +
 +
Rack '''0''', Slot '''2'''<br>
 +
 +
IP Address of the IBHLink S5++
 +
 +
 +
Configuration of the Station within the hardware configurator:<br>
 +
 +
 +
[[Image:IBH_Link_UA_IBH_Link_S5_PLC_Properties.png|687px]]
 +
 +
 +
[[Image:IBH_Link_UA_Step7_hint.png|710px]]
 +
 +
 +
[[Image:IBH_Link_UA_IBH_Link_S5_Symbols.png|501px]]
 +
 +
 +
[[Image:IBH_Link_UA_IBH_Link_S5_Symbol_Table.png|475px]]
 +
 +
 +
[[Image:IBH_Link_UA_IBH_Link_S5_OPC_Symbols.png|787px]]
 +
 +
 +
 +
The further pocedure can be found at '''[https://wiki.ibhsoftec.com/en/IBH_Link_UA:Configuration_with_STEP7 Configuration with STEP®7]]'''
  
 
==STEP7 Sample: IBH Link UA with S7 315-2DP routet via [http://www.ibhsoftec.com/IBH-Link-S7-PP-Eng IBH Link S7++]==
 
==STEP7 Sample: IBH Link UA with S7 315-2DP routet via [http://www.ibhsoftec.com/IBH-Link-S7-PP-Eng IBH Link S7++]==
  
 
'''Download: [http://download.ibhsoftec.com/german/Beispiele/IBH_Link_UA_IBH_S7_S7315DP_Routing.zip STEP7 Sample: IBH Link UA with S7 315-2DP]'''
 
'''Download: [http://download.ibhsoftec.com/german/Beispiele/IBH_Link_UA_IBH_S7_S7315DP_Routing.zip STEP7 Sample: IBH Link UA with S7 315-2DP]'''
 +
 +
S7-300 and S7-400 controllers which do not have an Ethernet port available can be connected via the '''[http://www.ibhsoftec.com/IBH-Link-S7-PP-Eng IBH Link S7++]''' or the '''[http://www.ibhsoftec.com/IBH-Link-S7-PP-HS-Eng IBH Link S7++ HS]''' to the  IBH Link UA.
 +
 +
Within the IBHNet settings the routing mode must be activated. This mode is available beginning with firmware version 2.142.<br>
 +
 +
With projected connections via RFC1006 it is not possible to communicate over unprojected connections any more!<br>
 +
 +
The normal IBHNet communication over port 1099 via the IBHNet driver is not influenced from this setting.
 +
 +
[[Image:IBHLink_routing.png|463]]<br>
 +
 +
 +
The IBH Link S7++ will be configured as a S7-400 station within NetPro and connected with the bus system (MPI or PROFIBUS)<br>
 +
 +
[[Image:IBH_Link_UA_Routing_Dummy_CPU.png|823px]]<br>
 +
 +
The following station must be selected:<br>
 +
 +
MLFB: '''6ES7 412-2EK06-0AB0 V6.0'''<br>
 +
 +
Rack '''0''', Slot '''2'''<br>
 +
 +
MPI/PROFIBUS address of the IBHLink S7++<br>
 +
 +
IP Address of the IBHLink S7++
 +
 +
 +
Configuration of the Station within the hardware configurator:<br>
 +
 +
[[Image:IBH_Link_UA_Routing_IBH_Link_as_Station_HWK.png|591px]]<br>
 +
 +
 +
 +
A routed S7 connection from the OPC Server to the S7 PLC must be set up::
 +
 +
[[Image:IBH_Link_UA_Routing_Insert_New_Connection.png|362px]]<br>
 +
 +
[[Image:IBH_Link_UA_Routing_Connection_Properties.png|559px]]
 +
 +
 +
The further pocedure can be found at '''[https://wiki.ibhsoftec.com/en/IBH_Link_UA:Configuration_with_STEP7 Configuration with_STEP®7]]'''
  
 
==STEP7 Sample: IBH Link UA with S7-200 via [http://www.ibhsoftec.com/IBH-Link-S7-PP-Eng IBH Link S7++]==
 
==STEP7 Sample: IBH Link UA with S7-200 via [http://www.ibhsoftec.com/IBH-Link-S7-PP-Eng IBH Link S7++]==
Line 89: Line 170:
  
 
'''Download: [http://download.ibhsoftec.com/english/Samples/IBH_link_UA_IBH_Link_S7_S7_200.zip STEP7 Sample: IBH Link UA with S7-200 via IBH Link S7++]'''
 
'''Download: [http://download.ibhsoftec.com/english/Samples/IBH_link_UA_IBH_Link_S7_S7_200.zip STEP7 Sample: IBH Link UA with S7-200 via IBH Link S7++]'''
 +
 +
S7-200 controlers can be connected via the '''[http://www.ibhsoftec.com/IBH-Link-S7-PP-Eng IBH Link S7++]''' or the '''[http://www.ibhsoftec.com/IBH-Link-S7-PP-HS-Eng IBH Link S7++ HS]''' to the  IBH Link UA.
 +
 +
 +
Within the IBHNet settings the routing mode must be '''deactivated'''. This mode is available beginning with firmware version 2.142.
 +
 +
 +
[[Image:IBH_Link_S7_No_Routing.png|449px]]
 +
 +
 +
 +
The IBH Link S7++ will be configured as a S7-400 station within NetPro wthin an UR1 Rack(18 slots)<br>
 +
 +
MPI addresses of 2-18 for the S7-200 PLC are possible.<br>
 +
 +
The '''slot''' of the CPU represents the '''MPI''' address.
 +
 +
 +
[[Image:IBH_Link_UA_S7_200_NetPro.png|523px]]<br>
 +
 +
 +
The following station must be selected:<br>
 +
 +
MLFB: '''6ES7 412-2EK06-0AB0 V6.0'''<br>
 +
 +
IP Address of the IBHLink S7++
 +
 +
 +
Configuration of the Station within the hardware configurator:<br>
 +
 +
[[Image:IBH_Link_UA_S7_200_HW_Config.png|742px]]<br>
 +
 +
 +
 +
For the PLC a symbol table and the DB1 has to be created, the OB1 should be deleted.
 +
 +
 +
[[Image:IBH_Link_UA_S7_200_DB1_Eng.png|954px]]
 +
 +
 +
[[Image:IBH_Link_UA_S7_200_Symbols.png|524]]
 +
 +
 +
 +
 +
[[Image:IBH_Link_UA_S7_200_OPC_Symbols.png|780px]]
 +
 +
 +
 +
The further pocedure can be found at '''[https://wiki.ibhsoftec.com/en/IBH_Link_UA:Configuration_with_STEP7 Configuration with_STEP®7]]'''
  
 
==STEP7 Beispiel: IBH Link UA with [http://www.ibhsoftec.com/SoftPLC-Eng IBH SoftSPS]==
 
==STEP7 Beispiel: IBH Link UA with [http://www.ibhsoftec.com/SoftPLC-Eng IBH SoftSPS]==
  
 
'''Download: [http://download.ibhsoftec.com/german/Samples/IBH_Link_UA_IBH_SoftSPS.zip STEP7 Sample: IBH Link UA with IBH SoftSPS]'''
 
'''Download: [http://download.ibhsoftec.com/german/Samples/IBH_Link_UA_IBH_SoftSPS.zip STEP7 Sample: IBH Link UA with IBH SoftSPS]'''

Latest revision as of 10:42, 2 August 2017

Configuration of the IBH Link UA with STEP7

Description

In the following example the configuration with STEP7 is shown.

The S7 IM151-8 station is connected with the IBH Link UA via Ethernet.

The following addresses were chosen in the example:

IP addresses:

Station Address
IBHLink UA 192.168.10.125
S7-1500 192.168.10.129

Configuration:

A new device will be added (in the sample a S7 IM151-8) and networked with Ethernet(1):

IBH Link UA Step7 IM HW.png

Now a DB can be created:

IBH Link UA Step7 DB eng.png

IBH Link UA Step7 hint.png

In our sample the symbols Data and Flagword 1 are defined within the symbolic table:

IBH Link UA Step7 symbol table.png

Within OB1 the data word 1 and flag word 1 will be counted in our example:

IBH Link UA Step7 OB eng.png

After downloading the blocks OB1 and DB1 to the IM151-8 a Simatic PC Station must be added:

IBH Link UA Step7 add station.png


Within the properties of the Ethernet Port of the PC Station, the IP address of the IBH Links UA must be entered

after adding an OPC Server in slot 1 and an IE-module in slot 2

IBH Link UA Step7 station.png

IBH Link UA IP.png

Now a S7 connection between the OPC Server and the PC station must be established:

IBH Link UA Step7 connection.png

Within the properies of the OPC Server at <General> <S7> <OPC tags > the OPC Tags can be selected:

IBH Link UA Step7 configure symbols.png

Now the configuration needs to be downloaded to the PLC and the IBH Link UA:

IBH Link UA Step7 download stations.png

The configuration is now completed and the tags from the IBH link UA are available.

IBHLink UA STEP7 OPC Client eng.png

STEP7 Sample: IBH Link UA with SIMATIC S5 via IBH Link S5++

Download: STEP7 Sample: IBH Link UA S5

SIMATIC® S5 PLC can be connected to the IBH Link UA via the IBH Link S5++


The IBH Link S5++ will be configured as a S7-300 station within NetPro::


IBH Link UA IBH Link S5 Dummy CPU.png


The following station can be selected:

IM151-8 PN/DP CPU MLFB: 6ES7 151-8AB00-0AB0 V2.7

Rack 0, Slot 2

IP Address of the IBHLink S5++


Configuration of the Station within the hardware configurator:


IBH Link UA IBH Link S5 PLC Properties.png


IBH Link UA Step7 hint.png


IBH Link UA IBH Link S5 Symbols.png


IBH Link UA IBH Link S5 Symbol Table.png


IBH Link UA IBH Link S5 OPC Symbols.png


The further pocedure can be found at Configuration with STEP®7]

STEP7 Sample: IBH Link UA with S7 315-2DP routet via IBH Link S7++

Download: STEP7 Sample: IBH Link UA with S7 315-2DP

S7-300 and S7-400 controllers which do not have an Ethernet port available can be connected via the IBH Link S7++ or the IBH Link S7++ HS to the IBH Link UA.

Within the IBHNet settings the routing mode must be activated. This mode is available beginning with firmware version 2.142.

With projected connections via RFC1006 it is not possible to communicate over unprojected connections any more!

The normal IBHNet communication over port 1099 via the IBHNet driver is not influenced from this setting.

463


The IBH Link S7++ will be configured as a S7-400 station within NetPro and connected with the bus system (MPI or PROFIBUS)

IBH Link UA Routing Dummy CPU.png

The following station must be selected:

MLFB: 6ES7 412-2EK06-0AB0 V6.0

Rack 0, Slot 2

MPI/PROFIBUS address of the IBHLink S7++

IP Address of the IBHLink S7++


Configuration of the Station within the hardware configurator:

IBH Link UA Routing IBH Link as Station HWK.png


A routed S7 connection from the OPC Server to the S7 PLC must be set up::

IBH Link UA Routing Insert New Connection.png

IBH Link UA Routing Connection Properties.png


The further pocedure can be found at Configuration with_STEP®7]

STEP7 Sample: IBH Link UA with S7-200 via IBH Link S7++

Notes about the configuration can be found within the ReadMe.txt.

Download: STEP7 Sample: IBH Link UA with S7-200 via IBH Link S7++

S7-200 controlers can be connected via the IBH Link S7++ or the IBH Link S7++ HS to the IBH Link UA.


Within the IBHNet settings the routing mode must be deactivated. This mode is available beginning with firmware version 2.142.


IBH Link S7 No Routing.png


The IBH Link S7++ will be configured as a S7-400 station within NetPro wthin an UR1 Rack(18 slots)

MPI addresses of 2-18 for the S7-200 PLC are possible.

The slot of the CPU represents the MPI address.


IBH Link UA S7 200 NetPro.png


The following station must be selected:

MLFB: 6ES7 412-2EK06-0AB0 V6.0

IP Address of the IBHLink S7++


Configuration of the Station within the hardware configurator:

IBH Link UA S7 200 HW Config.png


For the PLC a symbol table and the DB1 has to be created, the OB1 should be deleted.


IBH Link UA S7 200 DB1 Eng.png


524



IBH Link UA S7 200 OPC Symbols.png


The further pocedure can be found at Configuration with_STEP®7]

STEP7 Beispiel: IBH Link UA with IBH SoftSPS

Download: STEP7 Sample: IBH Link UA with IBH SoftSPS

Retrieved from "https://wiki.ibhsoftec.com/en/index.php?title=IBH_Link_UA:Configuration_with_STEP7&oldid=1973"