Difference between revisions of "IBHLink S7++:Time Synchronisation with NetPro"

Latest revision as of 12:51, 19 September 2013

Projected Time Synchronisation with IBHLink S7++ or IBHLink S7++ HS.

Within IBH Link setting Routing has to be activated :

The IBHLink S7++ / IBH Link S7++HS is engineered as PLC station in NetPro and networked via MPI or Profibus with the PLC.

MLFB: 6ES7 412-2EK06-0AB0 V6.0 Rack 0, Slot 2

The IP and MPI/Profibus addresses need to be set equal to the addresses within the IBH Link S7++ / S7++ HS.

The selected NTP(Network Time Protocol) Server must be reachable.

Set the Synchronisation <On the MPI> to Master:

Within the properties of the networked PLC you have to set up the synchronisation as follows:

The Network project needs to be loaded in the IBH Link S7++/ IBH Link S7++HS and the networked PLC:

@@ Line 10: / Line 10: @@
-The IBHLink S7++ / IBH Link S7++HS is engineered as PLC station in NetPro and networked via MPI®
+The IBHLink S7++ / IBH Link S7++HS is engineered as PLC station in NetPro and networked via MPI
 or Profibus with the PLC.
 MLFB: 6ES7 412-2EK06-0AB0 V6.0 Rack 0, Slot 2
@@ Line 31: / Line 32: @@
 [[Image:Clock_Master.png‎|537px]]
-In der angeschlossenen CPU muss die Uhrsynchronisation wie folgt eingestellt werden:
+Within the properties of the networked PLC you have to set up the synchronisation as follows:
-[[Image:SCPU_Slave.png‎|537px]]
+[[Image:Clock_Slave.png‎|537px]]
-Die Projektierung wird in den IBH Link S7++/ IBH Link S7++HS und in die angeschlossene(n) CPU(s) geladen:
+The Network project needs to be loaded in the IBH Link S7++/ IBH Link S7++HS and the networked PLC:
-[[Image:Station_laden.png‎|761px]]
+[[Image:Download_stations.png‎|656px]]