IBHLink S5++:SIMATIC® S5 PLC PcVue: Difference between revisions
Created page with "It is possible to realize a connection from a PC with '''PcView''' to a SIMATIC® S5 station over ethernet using an IBHLink S7++ as gateway. ==Example== In the following exam..." |
No edit summary |
||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
It is possible to realize a connection from a PC with ''' | It is possible to realize a connection from a PC with '''PcVue''' to a SIMATIC S5 station over ethernet using an [http://www.ibhsoftec.com/IBH-Link-S5-PP-Eng IBHLink S5++] as gateway. | ||
==Example== | ==Example== | ||
In the following example a configuration with ''' | In the following example a configuration with '''PcVue''' is shown. | ||
The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a | The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a SIMATIC S5 station on the AS511 port. Communication parameters were configured by the IBHNet configuration tool. | ||
The following addresses were chosen in the example: | The following addresses were chosen in the example: | ||
| Line 17: | Line 17: | ||
|} | |} | ||
'''Operation with S7 HMI devices:''' | |||
For the operation with S7 HMI devices the following settings need to be made: | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| IP address of the PLC || IP address of the IBH Link S5++ | |||
|- | |||
| Rack number of the PLC || 0 | |||
|- | |- | ||
| | | Slot number of the PLC || 2 | ||
|- | |- | ||
| | | MPI address of the PLC || 2 | ||
|} | |} | ||
'''Configuration:''' | '''Configuration:''' | ||
| Line 41: | Line 38: | ||
By double clicking the line *CREATION* below <Node>:you can enter the IP address of the '''IBH Link S7++'''. <br /> | By double clicking the line *CREATION* below <Node>:you can enter the IP address of the '''IBH Link S7++'''. <br /> | ||
As <Equipment type> please select '''S7300/400'''<br /> | As <Equipment type> please select '''S7300/400'''<br /> | ||
[[Image: | [[Image:PcVue_node_parameter_S5.png|412px]]<br /> | ||
<br /> | <br /> | ||
By double clicking the line *CREATION* below <Frame the needed variables can be choosen><br /> | By double clicking the line *CREATION* below <Frame the needed variables can be choosen><br /> | ||
Latest revision as of 10:03, 19 September 2013
It is possible to realize a connection from a PC with PcVue to a SIMATIC S5 station over ethernet using an IBHLink S5++ as gateway.
Example
In the following example a configuration with PcVue is shown. The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to a SIMATIC S5 station on the AS511 port. Communication parameters were configured by the IBHNet configuration tool.
The following addresses were chosen in the example:
IP addresses:
| Station | Address |
|---|---|
| HMI station | 192.168.10.122 |
| IBHLink S5++ | 192.168.10.102 |
Operation with S7 HMI devices: For the operation with S7 HMI devices the following settings need to be made:
| IP address of the PLC | IP address of the IBH Link S5++ |
| Rack number of the PLC | 0 |
| Slot number of the PLC | 2 |
| MPI address of the PLC | 2 |
Configuration:
The ethernet communication driver for S7-300/400 named SIEMENS IP ISO-S7 must be selected by double clicking the line *CREATION* below Network :
By double clicking the line *CREATION* below <Node>:you can enter the IP address of the IBH Link S7++.
As <Equipment type> please select S7300/400
By double clicking the line *CREATION* below <Frame the needed variables can be choosen>
After that the communication objects have to be activated by clicking on the buttons <ON< and <Validate>:
Within the Application Explorer you can add a Register:
The configuration is now completed and the variables/registers can be used:
