Difference between revisions of "S7-SoftPLC:NVRAM configuration with the user interface"
From IBHsoftec Wiki English
(Created page with "none '''Retain memory type:''' Determines whether an ADS-TEC PCI-card or a file system is to be used. '''Folder for Retain-File (no local dr...") |
(No difference)
|
Latest revision as of 08:13, 23 January 2013
Retain memory type:
Determines whether an ADS-TEC PCI-card or a file system is to be used.
Folder for Retain-File (no local drives):
Path to retain data.
Write inteval (ms):
Sequence, the remanent data is supposed to be saved in.
Priority:
Priority of the thread, that saves the data.
Status SFC Number:
Block number of the Status SFC.
Show Status SFC as FC
Shows Status SFC as FC in S7-SoftPLC.
Remanent areas:
Areas that are being kept remanent
NOTE: THE AVAILABLE LENGHT OF RETAIN DATA DEPENDS ON THE VALUES SET IN THE S7 HARDWARE CONFIGURATION.
