Jonas: Created page with "Online functions are available for ''S7 for Windows''® and Siemens SIMATIC® Manager. If the programming system is installed on the same computer a..."

2012-12-19T09:18:26Z

Created page with "Online functions are available for ''S7 for Windows''® and Siemens SIMATIC® Manager. If the programming system is installed on the same computer a..."

New page

Online functions are available for [[S7fW.htm|''S7 for Windows''®]] and Siemens [[Step7.htm|SIMATIC® Manager]]. If the programming system is installed on the same computer as ''S7-SoftPLC'', the data exchange can be done over the internal PC memory. The necessary drivers are installed with ''S7-SoftPLC''. Alternatively the data exchange can be done over a serial port. Therefore the programming unit can be connected via a zero modem cable. A PC adaptor with 38,4 kBaud on the programming unit has to be selected here. Furthermore online functions over TCP/IP Ethernet are provided via the ''IBHNet'' driver. The ''IBHNet'' driver can be freely downloaded from the IBH''softec'' homepage. Via Siemens ISO-On-TCP (RFC1006) protocol online functions are also possible. Therefore the [[../Configuration/User_interface/cpx43.htm|Ethernet CP-343/443]] has to be integrated in the configuration.

If a [[../Configuration/User_interface/CIF.htm|Hilscher CIF30/50/60]] PROFIBUS<sup>®</sup> card is used, ''S7-SoftPLC'' can be programmed over the connected PROFIBUS<sup>®</sup>. Operator panels can also be connected, if the card driver is configured correctly.

S7-SoftPLC:S7-SoftPLC online functions - Revision history

Jonas: Created page with "Online functions are available for ''S7 for Windows''® and Siemens SIMATIC® Manager. If the programming system is installed on the same computer a..."