Jonas: Created page with "In this section the basic settings of ''S7-SoftPLC'' are entered. {| class="wikitable" |- ! Keyname !! Values !! Default Value !! Description |- | OS || NT4 / W2K || W2K || U..."

2012-12-19T12:41:31Z

Created page with "In this section the basic settings of ''S7-SoftPLC'' are entered. {| class="wikitable" |- ! Keyname !! Values !! Default Value !! Description |- | OS || NT4 / W2K || W2K || U..."

New page

In this section the basic settings of ''S7-SoftPLC'' are entered.

{| class="wikitable"
|-
! Keyname !! Values !! Default Value !! Description
|-
| OS || NT4 / W2K || W2K || Used operating system
NT4 = WinNT4, W2K = Win2000/XP or better
|-
| LANGUAGE || DEU / ENG || DEU || user interface language of the S7-SoftPLC
DEU = german, ENG = english
|-
| MPI || 0 .. 4 || 0 || Used port
0 = Internal, 1 = COM1, 2 = COM2, etc...
|-
| LOAD || 0 / 1 || 0 || 0 = Do not load PLC program at start-up
1 = Load PLC program from S7.BIN at start-up
|-
| STORE || 0 / 1 || 0 || 0 = Do not save PLC program at shut down
1 = Save PLC program in S7.BIN at shut down
|-
| S7_STORE || 50000.....end of PC memory || 500000 || Size of load memory in bytes
The S7-SoftPLC 315 has a limited load memory of 297225 byte
|-
| STORE_NO_STOP || 0 / 1 || 0 || 1 = Save without stopping the PLC
WARNING: IF THE PROGRAM IS SAVED DURING A RUNNING OPERATION, THE CYCLE TIME CAN RISE.
|-
| REM || 0 / 1 || 0 || 1 = Memory is kept remanent for M,T,C (starting at byte 0 up to the value set with hardware configation).
|-
| KEY_SWITCH || 1 / 2 || 2 || 1 = Signals the PU, that the key switch is set to RUN, no block downloading possible
2 = Signals the PU, that the key switch is set to RUN-P.
|-
| NOMP || 0 / 1 || 0 || 1 = Sets the single processor mode fixed. With real double or dual-core processors the PLC has got 25% computing time. This option should be activated with hyperthreading processors, otherwise the processor load and the cycle time can vary.
|-
| WINTIME || 1 .. 8 || 1 || Reserved CPU processing time for Windows in ms
3 = 3 ms Windows and 1 ms PLC, which corresponds to 75% processing time for Windows and 25% for S7-SoftPLC.
|}

S7-SoftPLC:CPU Parameters of S7-SoftPLC - Revision history

Jonas: Created page with "In this section the basic settings of ''S7-SoftPLC'' are entered. {| class="wikitable" |- ! Keyname !! Values !! Default Value !! Description |- | OS || NT4 / W2K || W2K || U..."