Jonas at 09:26, 17 January 2013

2013-01-17T09:26:12Z

← Older revision		Revision as of 09:26, 17 January 2013
Line 58:		Line 58:

	To define the values for the process image manually, the option standard values for the process image has to be deactivated.		To define the values for the process image manually, the option standard values for the process image has to be deactivated.


	=== Diagnostics ===		=== Diagnostics ===

Jonas at 09:25, 17 January 2013

2013-01-17T09:25:15Z

← Older revision		Revision as of 09:25, 17 January 2013
Line 1:		Line 1:
	The dialog consists of two tabs, which configure the driver for the Hilscher CIF-cards.		The dialog consists of two tabs, which configure the driver for the Hilscher CIF-cards.


	=== Preferences ===		=== Preferences ===

Jonas: Created page with "The dialog consists of two tabs, which configure the driver for the Hilscher CIF-cards. === Preferences === none In this window the specific..."

2013-01-17T09:25:05Z

Created page with "The dialog consists of two tabs, which configure the driver for the Hilscher CIF-cards. === Preferences === frame|none In this window the specific..."

New page

The dialog consists of two tabs, which configure the driver for the Hilscher CIF-cards.

=== Preferences ===

[[Image:Konf_CIF30.png|frame|none]]

In this window the specific settings for the Hilscher cards (ISA, PCI, PCMCIA) are conducted. If several Hilscher cards are installed in the PC, the according drivers have to be integrated into ''S7-SoftPLC''. Care must be taken, that the areas in the process image of the PLC do not overlap each other. This means, that if multiple CIF-cards are used, the settings for BitStart, BitEnd etc. have to be taken with great care.

'''Default'''

Sets all settings back to default values.

'''Display SFC14'''

Displays SFC14.

'''Display SFC15'''

Displays SFC15.

WARNING: IF MULTIPLE CIF-CARDS ARE RUNNING ON ONE SYSTEM, THE SFC 14 AND 15 OF ONLY ONE CIF-CARD ARE ALLOWED TO BE SHOWN!

'''Don't stop fieldbus on PLC stop (only for PU functions via DP)'''

Prevents, that the bus is stopped at PLC Stop by the watchdog. The outputs are programmed set to 0. The Hilscher card is initialized when starting the PLC or changing the system data. At RUN/STOP, no further initialization is performed. If online functions are used via PROFIBUS® with ''S7 for Windows''® or STEP®7, this option has to be activated.

'''Use default values for the process image'''

End address in the process image in the PLC: 511

End address of the PLC periphery area: 8192

All other values: 0

'''Show Status and Control SFC as FC'''

Defines, whether the StatusSFC and the ControlSFC appear as SFC or FC in the block directory. This has the advantage that empty blocks in the PLC-program can be created and the parameters can be given reasonable names. When creating a block header care must be taken, that the data types and the IN/OUT areas are identical with the PLC blocks. When the blocks (FC) are transferred to the PLC via PU, the PLC keeps the internal blocks.

'''Status SFC Number (CIF Diagnostics)'''

Defines the number of the Status SFC.

'''Control SFC Number (CIF Special CIF functions)'''

Defines the number of the Control SFC.

'''Process image'''

To define the values for the process image manually, the option standard values for the process image has to be deactivated.

=== Diagnostics ===

[[Image:Konf_CIF_Diag.png|frame|none]]

'''CIF Information for Board n'''

Shows type, company version and status of the selected Hilscher card.

'''Detail information'''

See documentation for the corresponding Hilscher card.

S7-SoftPLC:CIF 30/50/60 Settings - Revision history

Jonas at 09:26, 17 January 2013

Jonas at 09:25, 17 January 2013

Jonas: Created page with "The dialog consists of two tabs, which configure the driver for the Hilscher CIF-cards. === Preferences === none In this window the specific..."