OPCServer:Overview - Revision history

Harald: /* IBHsoftec GmbH OPC Server V4.x */

2013-09-19T12:16:06Z

IBHsoftec GmbH OPC Server V4.x

← Older revision		Revision as of 12:16, 19 September 2013
Line 5:		Line 5:
	PLCs may be accessed via the following protocols:		PLCs may be accessed via the following protocols:

	SIMATIC<sup>~~®~~</sup> S5:		SIMATIC<sup></sup> S5:

	*AS511 serial / USB		*AS511 serial / USB
Line 15:		Line 15:


	SIMATIC<sup>~~®~~</sup> S7-300/400:		SIMATIC<sup></sup> S7-300/400:

	*MPI Adaptor serial / USB		*MPI Adaptor serial / USB
Line 25:		Line 25:


	SIMATIC<sup>~~®~~</sup> S7-200:		SIMATIC<sup></sup> S7-200:

	*PPI Adaptor serial / USB		*PPI Adaptor serial / USB
Line 32:		Line 32:


	SIMATIC<sup>~~®~~</sup> S7-1200:		SIMATIC<sup></sup> S7-1200:

	*S7 TCP/IP to the integrated CP		*S7 TCP/IP to the integrated CP


	SIMATIC<sup>~~®~~</sup> S7-1500:		SIMATIC<sup></sup> S7-1500:

	*S7 TCP/IP to the integrated CP		*S7 TCP/IP to the integrated CP


	LOGO!<sup>~~®~~</sup> (RCE versions)		LOGO!<sup></sup> (RCE versions)

	*S7 TCP/IP to the integrated CP		*S7 TCP/IP to the integrated CP

Harald at 12:15, 19 September 2013

2013-09-19T12:15:23Z

← Older revision		Revision as of 12:15, 19 September 2013
Line 1:		Line 1:
	== IBH''softec'' GmbH OPC Server V4.x ==		== IBH''softec'' GmbH OPC Server V4.x ==

	The IBH OPC Server permits OPC client applications like SCADA systems, to connect to PLCs of the Siemens ~~SIMATIC®~~ S5 and the ~~SIMATIC®~~ S7 series. It is also possible to access data simultaneously from several PLC Controls. Even a mixed S5 and S7 operation is possible. All modern SCADA systems are usually designed to be an OPC client.		The IBH OPC Server permits OPC client applications like SCADA systems, to connect to PLCs of the Siemens SIMATIC S5 and the SIMATIC S7 series. It is also possible to access data simultaneously from several PLC Controls. Even a mixed S5 and S7 operation is possible. All modern SCADA systems are usually designed to be an OPC client.

	PLCs may be accessed via the following protocols:		PLCs may be accessed via the following protocols:
Line 57:		Line 57:
	For symbolic addresses, PLC programs in following formats may be used.		For symbolic addresses, PLC programs in following formats may be used.

	* ~~SIMATIC®~~ S5 (.S5D)		* SIMATIC S5 (.S5D)
	* ~~SIMATIC®~~ S7 (.S7P)		* SIMATIC S7 (.S7P)
	* S5/S7 for Windows® project (.S5P)		* S5/S7 for Windows® project (.S5P)
	* S5/S7 for Windows® program file (.S5)		* S5/S7 for Windows® program file (.S5)
	* Symbolic table (.SEQ)		* Symbolic table (.SEQ)



	~~Simatic, S7-200, S7-300, S7-400, WinCC, are trademarks of Siemens AG.~~

	~~Windows, Visual Basic, Visual C und ActiveX are trademarks of Microsoft Corporation.~~

Jonas at 06:43, 10 April 2013

2013-04-10T06:43:30Z

← Older revision		Revision as of 06:43, 10 April 2013
Line 5:		Line 5:
	PLCs may be accessed via the following protocols:		PLCs may be accessed via the following protocols:

	* SIMATIC® S5:		SIMATIC<sup>®</sup> S5:
	* AS511 serial / USB
	* IBHLink S5 TCP/IP and IBHLink S5++ TCP/IP
	* IBHsoftec SoftPLC internal und external
	* TCP/IP with Siemens and INAT protocol
	* H1 with the OpenSource driver WinPcap
	* SINEC L2 over an IBH Link S7++ (HS)

			*AS511 serial / USB
			*IBHLink S5 TCP/IP and IBHLink S5++ TCP/IP
			*IBHsoftec SoftPLC internal und external
			*TCP/IP with Siemens and INAT protocol
			*H1 with the OpenSource driver WinPcap
			*SINEC L2 over an IBH Link S7++ (HS)

	* SIMATIC® S7-300/400:
	* MPI Adaptor serial / USB
	* IBHLink S7 / IBHLink Plus / IBHLink S7++
	* S7 TCP/IP to a CP343/443
	* SimaticNet® (Set PG/PC Interface)
	* IBHsoftec SoftPLC internal and external
	* H1 with the OpenSource driver WinPcap

			SIMATIC<sup>®</sup> S7-300/400:

	* ~~SIMATIC® S7-200:~~		*MPI Adaptor serial / USB
	* PPI Adaptor serial / USB		*IBHLink S7 / IBHLink Plus / IBHLink S7++
	* IBHLink S7 / IBHLink Plus / IBHLink S7++		*S7 TCP/IP to a CP343/443
	* S7 TCP/IP to a ~~CP243~~		*SimaticNet<sup>®</sup> (Set PG/PC Interface)
			*IBHsoftec SoftPLC internal and external
			*H1 with the OpenSource driver WinPcap


	* SIMATIC® S7-~~1200~~:		SIMATIC<sup>®</sup> S7-200:
	* S7 TCP/IP to the integrated CP

			*PPI Adaptor serial / USB
			*IBHLink S7 / IBHLink Plus / IBHLink S7++
			*S7 TCP/IP to a CP243

	* LOGO!® (RCE versions)
			SIMATIC<sup>®</sup> S7-1200:

			*S7 TCP/IP to the integrated CP


			SIMATIC<sup>®</sup> S7-1500:

			*S7 TCP/IP to the integrated CP


			LOGO!<sup>®</sup> (RCE versions)

			*S7 TCP/IP to the integrated CP

Joscha: /* IBHsoftec GmbH OPC Server V4.x */

2013-02-01T11:11:08Z

IBHsoftec GmbH OPC Server V4.x

← Older revision		Revision as of 11:11, 1 February 2013
Line 9:		Line 9:
	* IBHLink S5 TCP/IP and IBHLink S5++ TCP/IP		* IBHLink S5 TCP/IP and IBHLink S5++ TCP/IP
	* IBHsoftec SoftPLC internal und external		* IBHsoftec SoftPLC internal und external
	* ~~INAT~~ TCP/IP		* TCP/IP with Siemens and INAT protocol
	* ~~INAT~~ H1		* H1 with the OpenSource driver WinPcap
			* SINEC L2 over an IBH Link S7++ (HS)


Line 19:		Line 20:
	* SimaticNet® (Set PG/PC Interface)		* SimaticNet® (Set PG/PC Interface)
	* IBHsoftec SoftPLC internal and external		* IBHsoftec SoftPLC internal and external
	* ~~INAT~~ H1		* H1 with the OpenSource driver WinPcap

Jonas: moved Overview to OPCServer:Overview

2012-06-25T06:53:21Z

moved Overview to OPCServer:Overview

← Older revision	Revision as of 06:53, 25 June 2012
(No difference)

Jonas: /* IBHsoftec GmbH OPC Server V4.x */

2012-06-04T08:26:07Z

IBHsoftec GmbH OPC Server V4.x

← Older revision		Revision as of 08:26, 4 June 2012
Line 39:		Line 39:
	One of the special features of the '''''IBH OPC Server''''' is to allow direct use of the absolute PLC Variables without declaration. It is also possible to use symbolic addressing as defined in the PLC program (Symbolic Table). Even variables used in S7 Data Blocks can be accessed via the '''''IBH OPC Server''''' with their symbolic names. These features eliminate the need of double declarations. To do so, the PLC program is assigned with the '''''IBH OPCEditor''''' to the PLCName and the required variables are selected within the user interface.		One of the special features of the '''''IBH OPC Server''''' is to allow direct use of the absolute PLC Variables without declaration. It is also possible to use symbolic addressing as defined in the PLC program (Symbolic Table). Even variables used in S7 Data Blocks can be accessed via the '''''IBH OPC Server''''' with their symbolic names. These features eliminate the need of double declarations. To do so, the PLC program is assigned with the '''''IBH OPCEditor''''' to the PLCName and the required variables are selected within the user interface.

	[[Server ~~Configuraion~~\|Server Configuration]]		[[Server Configuration\|Server Configuration]]

	[[Variable Syntax\|Variable Syntax]]		[[Variable Syntax\|Variable Syntax]]

Jonas: /* IBHsoftec GmbH OPC Server V4.x */

2012-06-04T08:24:44Z

IBHsoftec GmbH OPC Server V4.x

← Older revision		Revision as of 08:24, 4 June 2012
Line 41:		Line 41:
	[[Server Configuraion\|Server Configuration]]		[[Server Configuraion\|Server Configuration]]

	[[~~Variable_Syntax.htm~~\|Variable Syntax]]		[[Variable Syntax\|Variable Syntax]]

	For symbolic addresses, PLC programs in following formats may be used.		For symbolic addresses, PLC programs in following formats may be used.

Jonas: /* IBHsoftec GmbH OPC Server V4.x */

2012-06-04T06:47:08Z

IBHsoftec GmbH OPC Server V4.x

← Older revision		Revision as of 06:47, 4 June 2012
Line 39:		Line 39:
	One of the special features of the '''''IBH OPC Server''''' is to allow direct use of the absolute PLC Variables without declaration. It is also possible to use symbolic addressing as defined in the PLC program (Symbolic Table). Even variables used in S7 Data Blocks can be accessed via the '''''IBH OPC Server''''' with their symbolic names. These features eliminate the need of double declarations. To do so, the PLC program is assigned with the '''''IBH OPCEditor''''' to the PLCName and the required variables are selected within the user interface.		One of the special features of the '''''IBH OPC Server''''' is to allow direct use of the absolute PLC Variables without declaration. It is also possible to use symbolic addressing as defined in the PLC program (Symbolic Table). Even variables used in S7 Data Blocks can be accessed via the '''''IBH OPC Server''''' with their symbolic names. These features eliminate the need of double declarations. To do so, the PLC program is assigned with the '''''IBH OPCEditor''''' to the PLCName and the required variables are selected within the user interface.

	[[~~Create_Project.htm~~\|Server ~~configuration~~]]		[[Server Configuraion\|Server Configuration]]

	[[Variable_Syntax.htm\|Variable Syntax]]		[[Variable_Syntax.htm\|Variable Syntax]]

Jonas: Created page with "== IBH''softec'' GmbH OPC Server V4.x == The IBH OPC Server permits OPC client applications like SCADA systems, to connect to PLCs of the Siemens SIMATIC® S5 and the SIMATIC..."

2012-06-04T06:33:36Z

Created page with "== IBH''softec'' GmbH OPC Server V4.x == The IBH OPC Server permits OPC client applications like SCADA systems, to connect to PLCs of the Siemens SIMATIC® S5 and the SIMATIC..."

New page

== IBH''softec'' GmbH OPC Server V4.x ==

The IBH OPC Server permits OPC client applications like SCADA systems, to connect to PLCs of the Siemens SIMATIC® S5 and the SIMATIC® S7 series. It is also possible to access data simultaneously from several PLC Controls. Even a mixed S5 and S7 operation is possible. All modern SCADA systems are usually designed to be an OPC client.

PLCs may be accessed via the following protocols:

* SIMATIC® S5:
* AS511 serial / USB
* IBHLink S5 TCP/IP and IBHLink S5++ TCP/IP
* IBHsoftec SoftPLC internal und external
* INAT TCP/IP
* INAT H1

* SIMATIC® S7-300/400:
* MPI Adaptor serial / USB
* IBHLink S7 / IBHLink Plus / IBHLink S7++
* S7 TCP/IP to a CP343/443
* SimaticNet® (Set PG/PC Interface)
* IBHsoftec SoftPLC internal and external
* INAT H1

* SIMATIC® S7-200:
* PPI Adaptor serial / USB
* IBHLink S7 / IBHLink Plus / IBHLink S7++
* S7 TCP/IP to a CP243

* SIMATIC® S7-1200:
* S7 TCP/IP to the integrated CP

* LOGO!® (RCE versions)

The configuration of the Server is performed via the OPCEditor. A shortcut is installed on your PC.

One of the special features of the '''''IBH OPC Server''''' is to allow direct use of the absolute PLC Variables without declaration. It is also possible to use symbolic addressing as defined in the PLC program (Symbolic Table). Even variables used in S7 Data Blocks can be accessed via the '''''IBH OPC Server''''' with their symbolic names. These features eliminate the need of double declarations. To do so, the PLC program is assigned with the '''''IBH OPCEditor''''' to the PLCName and the required variables are selected within the user interface.

[[Create_Project.htm|Server configuration]]

[[Variable_Syntax.htm|Variable Syntax]]

For symbolic addresses, PLC programs in following formats may be used.

* SIMATIC® S5 (.S5D)
* SIMATIC® S7 (.S7P)
* S5/S7 for Windows® project (.S5P)
* S5/S7 for Windows® program file (.S5)
* Symbolic table (.SEQ)

Simatic, S7-200, S7-300, S7-400, WinCC, are trademarks of Siemens AG.

Windows, Visual Basic, Visual C und ActiveX are trademarks of Microsoft Corporation.