Axel: Created page with "== Configuration with IBH OPC Editor == Besides STEP7 or the TIA Portal the '''[http://www.ibhsoftec.com/IBH-OPC-Server-Eng IBH OPC Server]''' can be used for configuration. ..."

2016-03-17T10:41:31Z

Created page with "== Configuration with IBH OPC Editor == Besides STEP7 or the TIA Portal the '''[http://www.ibhsoftec.com/IBH-OPC-Server-Eng IBH OPC Server]''' can be used for configuration. ..."

New page

== Configuration with IBH OPC Editor ==

Besides STEP7 or the TIA Portal the '''[http://www.ibhsoftec.com/IBH-OPC-Server-Eng IBH OPC Server]''' can be used for configuration.

After installation the IBH OPC Editor is avilable for free in combination with the IBH OPC UA Server/Client.

The following protocols are supported:

* S7 300/400 TCP/IP

* S7 200 TCP/IP

* S7 1200 TCP/IP

* S7 1500 TCP/IP

* SIMATIC S5 with IBH Link S5++ via S7 TCP/IP protocol

[[Image:IBH_Link_UA_IBH_Editor_Project.png|200px]]

The operation instructions for the '''IBH OPC Editor''' can be found on our Wiki at: '''[http://wiki.ibhsoftec.com/en/Main_Page#OPC_Server IBH OPC Server]'''.

Within the mnenu '''OPC Slots''' the '''OPC Editor File''' can be loaded:

[[Image:IBH_Link_UA_Load_IBH_Editor_Project.png|803px]]

All PLC with supported protocols will be listed:

[[Image:IBH_Link_UA_IBH_Editor_Project_loading.png|803px]]

After the OPC Editor file was donwloaded successfully the different PLC and their variables are listed within the menu '''OPC Slots''':

[[Image:IBH_Link_UA_IBH_Editor_Project_loaded.png|803px]]

IBH OPC UA:Configuration with IBH OPC Editor - Revision history

Axel: Created page with "== Configuration with IBH OPC Editor == Besides STEP7 or the TIA Portal the '''[http://www.ibhsoftec.com/IBH-OPC-Server-Eng IBH OPC Server]''' can be used for configuration. ..."