Jonas at 08:30, 25 June 2012

2012-06-25T08:30:01Z

← Older revision		Revision as of 08:30, 25 June 2012
Line 6:		Line 6:


	Currently the '''''S7-~~''''''''''~~SoftPLC''''' and the '''''S7-CX''''' PLCs use the '''TCP port 1099'''. If your PLC sits behind a firewall, you need to open the appropriate ports for a communication in your firewall-software. Consult your administrator or the documentation of your firewall on how to permit access via certain ports. The '''''IBH Link S7''''' also uses the port '''1099'''.		Currently the '''''S7-SoftPLC''''' and the '''''S7-CX''''' PLCs use the '''TCP port 1099'''. If your PLC sits behind a firewall, you need to open the appropriate ports for a communication in your firewall-software. Consult your administrator or the documentation of your firewall on how to permit access via certain ports. The '''''IBH Link S7''''' also uses the port '''1099'''.

Jonas: Created page with " If the programming software and the '''IBH''softec S7-SoftPLC''''' version '''>3.x''' are used on different PCs in a wide area network, the '''''IBHNet''''' driver only ne..."

2012-06-25T07:40:47Z

Created page with " If the programming software and the '''IBH''softec S7-SoftPLC''''' version '''>3.x''' are used on different PCs in a wide area network, the '''''IBHNet''''' driver only ne..."

New page

If the programming software and the '''IBH''softec S7-SoftPLC''''' version '''>3.x''' are used on different PCs in a wide area network, the '''''IBHNet''''' driver only needs to be installed on the PC with the programming software. If the '''''IBH Link''''' communication adaptor is used, it is also sufficient to install the driver on the PU.

To be sure that the network connection is alive, please make sure that the remote PLC can be reached via the ethernet network. The easiest way do this, is to send a PING <IP-Address> from the DOS-Box.

Currently the '''''S7-''''''''''SoftPLC''''' and the '''''S7-CX''''' PLCs use the '''TCP port 1099'''. If your PLC sits behind a firewall, you need to open the appropriate ports for a communication in your firewall-software. Consult your administrator or the documentation of your firewall on how to permit access via certain ports. The '''''IBH Link S7''''' also uses the port '''1099'''.

IBHNet:Operation via the Internet - Revision history

Jonas at 08:30, 25 June 2012

Jonas: Created page with " If the programming software and the '''IBH''softec S7-SoftPLC''''' version '''>3.x''' are used on different PCs in a wide area network, the '''''IBHNet''''' driver only ne..."