IBHLink S7++:PLC-PLC communication - Revision history

Axel: /* Connection via IBH Link in routing mode */

2014-07-07T14:18:38Z

Connection via IBH Link in routing mode

← Older revision		Revision as of 14:18, 7 July 2014
Line 308:		Line 308:
	[[Image:Connection_multi.png]]<br>		[[Image:Connection_multi.png]]<br>

	For the connection to an IBH Link S5++, no dummy CPU needs to be configured within NetPro. It is enough to create an unspecified S7 connection via Ethernet. In this case, the partner IP address is the IP address of the IBH Link S5++. Within the Address Details for the Partner '''Rack = 0''' and '''Slot = 2''' must be ~~selcted~~. For communication, the blocks PUT/GET are chosen - SFB14/15.<br>		For the connection to an IBH Link S5++, no dummy CPU needs to be configured within NetPro. It is enough to create an unspecified S7 connection via Ethernet. In this case, the partner IP address is the IP address of the IBH Link S5++. Within the Address Details for the Partner '''Rack = 0''' and '''Slot = 2''' must be selected. For communication, the blocks PUT/GET are chosen - SFB14/15.<br>
	[[Image:IBHLinkS5_address.png]]<br>		[[Image:IBHLinkS5_address.png]]<br>

Axel: /* Connection via IBH Link in routing mode */

2014-07-07T14:16:32Z

Connection via IBH Link in routing mode

← Older revision		Revision as of 14:16, 7 July 2014
Line 308:		Line 308:
	[[Image:Connection_multi.png]]<br>		[[Image:Connection_multi.png]]<br>

	For the connection to an IBH Link S5++, no dummy CPU needs to be configured within NetPro. It is enough to create an unspecified S7 connection via Ethernet. In this case, the partner IP address is the IP address of the IBH Link S5++. For communication, the blocks PUT/GET are chosen - SFB14/15.<br>		For the connection to an IBH Link S5++, no dummy CPU needs to be configured within NetPro. It is enough to create an unspecified S7 connection via Ethernet. In this case, the partner IP address is the IP address of the IBH Link S5++. Within the Address Details for the Partner '''Rack = 0''' and '''Slot = 2''' must be selcted. For communication, the blocks PUT/GET are chosen - SFB14/15.<br>
	[[Image:IBHLinkS5_address.png]]<br>		[[Image:IBHLinkS5_address.png]]<br>

Harald: /* Connection via IBH Link in routing mode */

2013-09-19T11:23:57Z

Connection via IBH Link in routing mode

← Older revision		Revision as of 11:23, 19 September 2013
Line 262:		Line 262:
	- Interface has to support S7 connections<br>		- Interface has to support S7 connections<br>

	'''Download: [http://download.ibhsoftec.com/english/Samples/Ethernet_PROFIBUS_eng.zip ~~STEP®7~~ Sample: Connction via IBH Link in routing mode]'''		'''Download: [http://download.ibhsoftec.com/english/Samples/Ethernet_PROFIBUS_eng.zip STEP7 Sample: Connction via IBH Link in routing mode]'''

	This kind of connection offers the possibility to exchange a large amount of data very fast - up to 64K.		This kind of connection offers the possibility to exchange a large amount of data very fast - up to 64K.
Line 308:		Line 308:
	[[Image:Connection_multi.png]]<br>		[[Image:Connection_multi.png]]<br>

	For the connection to an IBH Link S5++, no dummy CPU needs to be configured within NetPro. It es enough to create an unspecified S7 connection via Ethernet. In this case, the partner IP address is the IP address of the IBH Link S5++. For communication, the blocks PUT/GET are chosen - SFB14/15.<br>		For the connection to an IBH Link S5++, no dummy CPU needs to be configured within NetPro. It is enough to create an unspecified S7 connection via Ethernet. In this case, the partner IP address is the IP address of the IBH Link S5++. For communication, the blocks PUT/GET are chosen - SFB14/15.<br>
	[[Image:IBHLinkS5_address.png]]<br>		[[Image:IBHLinkS5_address.png]]<br>

Harald: /* MPI – Ethernet – MPI with S7 conection (projected) / MPI – Ethernet / MPI – IBH Link S5++ */

2013-09-19T11:20:14Z

MPI – Ethernet – MPI with S7 conection (projected) / MPI – Ethernet / MPI – IBH Link S5++

← Older revision		Revision as of 11:20, 19 September 2013
Line 178:		Line 178:


	'''Download: [http://download.ibhsoftec.com/english/Samples/MPI_IBHLink_IBHlink_MPI_proj_eng.zip ~~STEP®7~~ sample: MPI – Ethernet – MPI with S7 connection (projectet)]'''		'''Download: [http://download.ibhsoftec.com/english/Samples/MPI_IBHLink_IBHlink_MPI_proj_eng.zip STEP7 sample: MPI – Ethernet – MPI with S7 connection (projectet)]'''

Harald: /* MPI – Ethernet – MPI without projected configuration / MPI – Ethernet/MPI – IBH Link S5++ */

2013-09-19T11:17:33Z

MPI – Ethernet – MPI without projected configuration / MPI – Ethernet/MPI – IBH Link S5++

← Older revision		Revision as of 11:17, 19 September 2013
Line 137:		Line 137:


	'''Download: [http://download.ibhsoftec.com/english/Samples/MPI_IBHLink_IBHlink_MPI_eng.zip ~~STEP®7~~ Sample: MPI – Ethernet – MPI without projected configuration]'''		'''Download: [http://download.ibhsoftec.com/english/Samples/MPI_IBHLink_IBHlink_MPI_eng.zip STEP7 Sample: MPI – Ethernet – MPI without projected configuration]'''

	[[Image:Block call.png]]<br>		[[Image:Block call.png]]<br>

Harald: /* Ethernet to PROFIBUS via PROFIBUS CP (Multiplexing) */

2013-09-19T11:15:14Z

Ethernet to PROFIBUS via PROFIBUS CP (Multiplexing)

← Older revision		Revision as of 11:15, 19 September 2013
Line 55:		Line 55:


	'''Download: [http://download.ibhsoftec.com/english/Samples/Ethernet2ProfibusCP_eng.zip ~~STEP®7~~ Sample: Ethernet to PROFIBUS via PROFIBUS-CP]'''		'''Download: [http://download.ibhsoftec.com/english/Samples/Ethernet2ProfibusCP_eng.zip STEP7 Sample: Ethernet to PROFIBUS via PROFIBUS-CP]'''

	Active:<br>		Active:<br>

Harald: /* Ethernet to MPI / PROFIBUS */

2013-09-19T11:12:21Z

Ethernet to MPI / PROFIBUS

← Older revision		Revision as of 11:12, 19 September 2013
Line 9:		Line 9:


	'''Download: [http://download.ibhsoftec.com/english/Samples/Ethernet2MPI_eng.zip ~~STEP®7~~ Sample: Ethernet to MPI/PROFIBUS]'''		'''Download: [http://download.ibhsoftec.com/english/Samples/Ethernet2MPI_eng.zip STEP7 Sample: Ethernet to MPI/PROFIBUS]'''

	Active:<br>		Active:<br>

Joscha at 07:30, 19 February 2013

2013-02-19T07:30:04Z

← Older revision		Revision as of 07:30, 19 February 2013
Line 304:		Line 304:
	[[Image:Connection_status.png]]<br>		[[Image:Connection_status.png]]<br>

	This type of connection allows ~~ocmplex~~ networking:<br>		This type of connection allows complex networking:<br>

	[[Image:Connection_multi.png]]<br>		[[Image:Connection_multi.png]]<br>

Joscha at 07:22, 19 February 2013

2013-02-19T07:22:47Z

Axel: /* Connection via IBH Link in routing mode */

2013-02-18T14:30:24Z

Connection via IBH Link in routing mode

← Older revision		Revision as of 14:30, 18 February 2013
Line 262:		Line 262:
	- Interface has to support S7 connections<br>		- Interface has to support S7 connections<br>

	'''Download: [http://download.ibhsoftec.com/english/Samples/Ethernet_PROFIBUS_eng.zip STEP®7 Sample: ~~Cennction~~ via IBH Link in routing mode]'''		'''Download: [http://download.ibhsoftec.com/english/Samples/Ethernet_PROFIBUS_eng.zip STEP®7 Sample: Connction via IBH Link in routing mode]'''

	This kind of connection offers the possibility to exchange a large amount of data very fast - up to 64K.		This kind of connection offers the possibility to exchange a large amount of data very fast - up to 64K.

← Older revision		Revision as of 07:22, 19 February 2013
Line 259:		Line 259:
	- SIMATIC Manager		- SIMATIC Manager
	- IBH Link S7++/IBH Link S7++ HS with Firmware >= 2.142<br>		- IBH Link S7++/IBH Link S7++ HS with Firmware >= 2.142<br>
	- CPU with MPI Interface<br>		- CPU with MPI/PROFIBUS Interface<br>
	- Interface has to support S7 connections<br>		- Interface has to support S7 connections<br>

Line 266:		Line 266:
	This kind of connection offers the possibility to exchange a large amount of data very fast - up to 64K.		This kind of connection offers the possibility to exchange a large amount of data very fast - up to 64K.

	For the communication the standard blocks FB/SFB 8/9 (USEND / URCV) and FB/SFB 12/13 (BSEND / BRCV) are used.<br>		For the communication, the standard blocks FB/SFB 8/9 (USEND / URCV) and FB/SFB 12/13 (BSEND / BRCV) are used.<br>


	Within the ~~IBH Net~~ settings the routing mode ~~msut~~ be activated. This mode is available beginning with firmware version 2.142.		Within the IBHNet settings the routing mode must be activated. This mode is available beginning with firmware version 2.142.

	With projected connections via RFC1006 it is not possible ~~any more~~ to communicate over unprojected connections!		With projected connections via RFC1006 it is not possible to communicate over unprojected connections any more!

	The IBHNet communication via the IBHNet driver is not influenced from this setting.		The normal IBHNet communication over port 1099 via the IBHNet driver is not influenced from this setting.

	[[Image:IBHLink_routing.png]]<br>		[[Image:IBHLink_routing.png]]<br>
Line 287:		Line 287:
	[[Image:IBH_Link_as_station_HWC.png]]<br>		[[Image:IBH_Link_as_station_HWC.png]]<br>

	Within NetPro all corresponding CPUs besides the IBH Link station ~~needs~~ to be configured. The S7 connection will be established from the real existing CPU via Ethernet to the IBH Link Station. In this case the real existing CPU is the active Partner.<br>		Within NetPro all corresponding CPUs besides the IBH Link station need to be configured. The S7 connection will be established from the real existing CPU via Ethernet to the IBH Link Station. In this case the real existing CPU is the active Partner.<br>
	[[Image:Connection1.png]]<br>		[[Image:Connection1.png]]<br>

	[[Image:Connection1_parameter.png]]<br>		[[Image:Connection1_parameter.png]]<br>

	The ~~Partner~~ connection ~~resourse~~ is given automatically and is relvant for the next step.<br>		The partners connection resource is given automatically and is relvant for the next step.<br>

	[[Image:Connection1_address.png]]<br>		[[Image:Connection1_address.png]]<br>

	The IBH Link station ~~builds up~~ a S7 connection via PROFIBUS to the second real existing CPU. In ~~ths~~ case the IBH Link station is the active Partner. As local ID the automatically given ID from the step before ~~will~~ be ~~chosen~~ (within the sample: 10).<br>		The IBH Link station establishes a S7 connection via PROFIBUS to the second real existing CPU. In this case, the IBH Link station is the active Partner. As local ID the automatically given ID from the step before must be entered (within the sample: 10).<br>

	[[Image:Connection2.png]]<br>		[[Image:Connection2.png]]<br>
Line 308:		Line 308:
	[[Image:Connection_multi.png]]<br>		[[Image:Connection_multi.png]]<br>

	For the connection to an IBH Link S5++ no dummy CPU needs to be ~~cnfigured~~ within NetPro. It es ~~neough~~ to create an unspecified S7 connection via Ethernet. In this case the partner IP address is the IP address of the IBH Link S5++. For communication the blocks PUT/GET are chosen- SFB14/15.<br>		For the connection to an IBH Link S5++, no dummy CPU needs to be configured within NetPro. It es enough to create an unspecified S7 connection via Ethernet. In this case, the partner IP address is the IP address of the IBH Link S5++. For communication, the blocks PUT/GET are chosen - SFB14/15.<br>
	[[Image:IBHLinkS5_address.png]]<br>		[[Image:IBHLinkS5_address.png]]<br>