IBHLink S5++:SIMATIC® S5 Elipse SCADA - Revision history

Harald at 10:04, 19 September 2013

2013-09-19T10:04:16Z

← Older revision		Revision as of 10:04, 19 September 2013
Line 1:		Line 1:
	It is possible to realize a connection from a PC with '''Elipse SCADA''' to a ~~SIMATIC®~~ S5 PLC over ethernet using an [http://www.ibhsoftec.com/IBH-Link-S5-PP-Eng IBHLink S5++] as gateway.		It is possible to realize a connection from a PC with '''Elipse SCADA''' to a SIMATIC S5 PLC over ethernet using an [http://www.ibhsoftec.com/IBH-Link-S5-PP-Eng IBHLink S5++] as gateway.

	==Example==		==Example==
	In the following example a configuration with '''Elipse SCADA''' is shown.		In the following example a configuration with '''Elipse SCADA''' is shown.
	The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to the AS511 port of the ~~SIMATIC®~~ S5 PLC. Communication parameters were configured by the IBHNet configuration tool.		The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to the AS511 port of the SIMATIC S5 PLC. Communication parameters were configured by the IBHNet configuration tool.

	The following addresses were chosen in the example:		The following addresses were chosen in the example:
Line 28:		Line 28:
	\| Slot number of the PLC \|\| 2		\| Slot number of the PLC \|\| 2
	\|-		\|-
	\| ~~MPI®~~ address of the PLC \|\| 2		\| MPI address of the PLC \|\| 2
	\|}		\|}
	Configuration:		Configuration:

Jonas: moved IBHLink S5++ SIMATIC® S5 Elipse SCADA to IBHLink S5++:SIMATIC® S5 Elipse SCADA

2012-06-25T06:51:27Z

moved IBHLink S5++ SIMATIC® S5 Elipse SCADA to IBHLink S5++:SIMATIC® S5 Elipse SCADA

← Older revision	Revision as of 06:51, 25 June 2012
(No difference)

Axel at 10:50, 19 June 2012

2012-06-19T10:50:45Z

← Older revision		Revision as of 10:50, 19 June 2012
Line 3:		Line 3:
	==Example==		==Example==
	In the following example a configuration with '''Elipse SCADA''' is shown.		In the following example a configuration with '''Elipse SCADA''' is shown.
	The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to the AS511 port of the SIMATIC® S5 PLC. ~~Bus~~ parameters ~~are~~ configured by the IBHNet configuration tool.		The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to the AS511 port of the SIMATIC® S5 PLC. Communication parameters were configured by the IBHNet configuration tool.

	The following addresses were chosen in the example:		The following addresses were chosen in the example:

Axel at 10:26, 19 June 2012

2012-06-19T10:26:13Z

← Older revision		Revision as of 10:26, 19 June 2012
Line 3:		Line 3:
	==Example==		==Example==
	In the following example a configuration with '''Elipse SCADA''' is shown.		In the following example a configuration with '''Elipse SCADA''' is shown.
	The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to the AS511 port of the SIMATIC® S5 PLC. Bus parameters ~~were~~ configured by the IBHNet configuration tool.		The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to the AS511 port of the SIMATIC® S5 PLC. Bus parameters are configured by the IBHNet configuration tool.

	The following addresses were chosen in the example:		The following addresses were chosen in the example:

Axel at 08:22, 19 June 2012

2012-06-19T08:22:43Z

← Older revision		Revision as of 08:22, 19 June 2012
Line 1:		Line 1:
	It is possible to realize a connection from a PC with '''Elipse SCADA''' to a ~~S7-300/400 station~~ over ethernet using an IBHLink S7++ as gateway.		It is possible to realize a connection from a PC with '''Elipse SCADA''' to a SIMATIC® S5 PLC over ethernet using an [http://www.ibhsoftec.com/IBH-Link-S5-PP-Eng IBHLink S5++] as gateway.

	==Example==		==Example==
	In the following example a configuration with '''Elipse SCADA''' is shown.		In the following example a configuration with '''Elipse SCADA''' is shown.
	The HMI station is connected to the IBHLink S7++ via an Ethernet connection. The IBHLink S7++ itself is connected to ~~a S7-300/S7-400 station by MPI or PROFIBUS~~. Bus parameters were configured by the IBHNet configuration tool.		The HMI station is connected to the IBHLink S5++ via an Ethernet connection. The IBHLink S5++ itself is connected to the AS511 port of the SIMATIC® S5 PLC. Bus parameters were configured by the IBHNet configuration tool.

	The following addresses were chosen in the example:		The following addresses were chosen in the example:

Axel at 14:21, 18 June 2012

2012-06-18T14:21:04Z

← Older revision		Revision as of 14:21, 18 June 2012
Line 41:		Line 41:
	Enter the IP Address of the IBH LinkS5 ++ and choose port 102:<br />		Enter the IP Address of the IBH LinkS5 ++ and choose port 102:<br />

	[[Image:Elipse_driver_settings_ethernet.png\|456px]]		[[Image:Elipse_driver_settings_ethernet.png\|456px]]<br />

	Now the '''N''' an '''P''' Parameters must be set. The description you'll find within the helpfile '''<mprot_us.chm>'''<br />		Now the '''N''' an '''P''' Parameters must be set. The description you'll find within the helpfile '''<mprot_us.chm>'''<br />
	In the sample DB1.DB0 is chosen:<br />		In the sample DB1.DB0 is chosen:<br />

Axel at 14:19, 18 June 2012

2012-06-18T14:19:17Z

← Older revision		Revision as of 14:19, 18 June 2012
Line 7:		Line 7:
	The following addresses were chosen in the example:		The following addresses were chosen in the example:

			IP addresses:
	IP addresses:		IP addresses:
	{\| class="wikitable"		{\| class="wikitable"
Line 14:		Line 15:
	\| HMI station \|\| 192.168.10.122		\| HMI station \|\| 192.168.10.122
	\|-		\|-
	\| IBHLink S7++ \|\| 192.168.10.125		\| IBHLink S5++ \|\| 192.168.10.125
	\|}		\|}

	~~MPI addresses~~:		'''Operation with S7 HMI devices:'''
			For the operation with S7 HMI devices the following settings need to be made:
	{\| class="wikitable"		{\| class="wikitable"
	\|-		\|-
	~~! Station !! Address~~		\| IP address of the PLC \|\| IP address of the IBH Link S5++
			\|-
			\| Rack number of the PLC \|\| 0
	\|-		\|-
	\| ~~IBHLink S7++~~ \|\| 17		\| Slot number of the PLC \|\| 2
	\|-		\|-
	\| ~~S7-300/S7-400 station~~ \|\| 2		\| MPI® address of the PLC \|\| 2
	\|}		\|}

	Configuration:		Configuration:

Line 36:		Line 39:


	Enter the IP Address of the IBH ~~LinkS7~~ ++ and choose port 102:<br />		Enter the IP Address of the IBH LinkS5 ++ and choose port 102:<br />

	[[Image:Elipse_driver_settings_ethernet.png\|456px]]		[[Image:Elipse_driver_settings_ethernet.png\|456px]]

Axel: Created page with "It is possible to realize a connection from a PC with '''Elipse SCADA''' to a S7-300/400 station over ethernet using an IBHLink S7++ as gateway. ==Example== In the following ..."

2012-06-18T14:17:42Z

Created page with "It is possible to realize a connection from a PC with '''Elipse SCADA''' to a S7-300/400 station over ethernet using an IBHLink S7++ as gateway. ==Example== In the following ..."

New page

It is possible to realize a connection from a PC with '''Elipse SCADA''' to a S7-300/400 station over ethernet using an IBHLink S7++ as gateway.

==Example==
In the following example a configuration with '''Elipse SCADA''' is shown.
The HMI station is connected to the IBHLink S7++ via an Ethernet connection. The IBHLink S7++ itself is connected to a S7-300/S7-400 station by MPI or PROFIBUS. Bus parameters were configured by the IBHNet configuration tool.

The following addresses were chosen in the example:

IP addresses:
{| class="wikitable"
|-
! Station !! Address
|-
| HMI station || 192.168.10.122
|-
| IBHLink S7++ || 192.168.10.125
|}

MPI addresses:
{| class="wikitable"
|-
! Station !! Address
|-
| IBHLink S7++ || 17
|-
| S7-300/S7-400 station || 2
|}

Configuration:

The ethernet communication driver for S7-300/400 named '''MProt.dll''' must be selected witin the Application Organizer:
[[Image:Elipse_driver.png|600px]]

Within the MProt settings the MPI/DP address of the PLC has to be entered as <Default slave address>
[[Image:Elipse_driver_settings.png|456px]] 

Enter the IP Address of the IBH LinkS7 ++ and choose port 102: 

[[Image:Elipse_driver_settings_ethernet.png|456px]]

Now the '''N''' an '''P''' Parameters must be set. The description you'll find within the helpfile '''<mprot_us.chm>''' 
In the sample DB1.DB0 is chosen: 

[[Image:Elipse_P_paramter.png|597px]]
[[Image:Elipse_N_paramter.png|597px]]

The configuration is now completed and the Tags can be used: 
[[Image:Elipse_tags.png|397px]]