View source for S7-SoftPLC:Configure the CP343/CP443 emulation via user interface

[[Image:Konf_x43.png|frame|none]]

The basic settings of the CP343/CP443 emulation are conducted here.


'''Start CP343/443 Emulation with the ''S7-SoftPLC'''''

Starts the CP emulation automatically, if ''S7-SoftPLC'' is starting.


'''Use FB55 (IP_CONFIG)'''

Shows the FB55 in the block list of ''S7-SoftPLC''.


'''Use FC5 (AG_SEND)'''

Shows the FC5 in the block list of ''S7-SoftPLC''.


'''Use FC6 (AG_RECV)'''

Shows the FC6 in the block list of ''S7-SoftPLC''.


'''Use FC7 (AG_LOCK)'''

Shows the FC7 in the block list of ''S7-SoftPLC''.


'''Use FC8 (AG_UNLOCK)'''

Shows the FC8 in the block list of ''S7-SoftPLC''.


'''Use FC10 (AG_CNTRL)'''

Shows the FC10 in the block list of ''S7-SoftPLC''.


'''Use FC50 (AG_LSEND)'''

Shows the FC50 in the block list of ''S7-SoftPLC''.


'''Use FC60 (AG_LRECV)'''

Shows the FC60 in the block list of ''S7-SoftPLC''.


'''Use FC62 (C_CNTRL)'''

Shows the FC62 in the block list of ''S7-SoftPLC''.


'''Send TCP acknowledges (some CPs)'''

Sends TCP acknowledges.


'''Start Modbus TCP server'''

Starts the Modbus TCP Server when starting the CP343/443.


'''Port'''

Assigns the defined port to the Modbus TCP Server. A Modbus TCP Server listens to Port 502 per default.


'''DBIn is Number'''

Data block number of the In-area.


'''DBOut is Number'''

Data block number of the Out-area.


'''Default'''

Sets all settings back to their default value.