View source for S5/S7 for Windows:USB S5/S7 Prommer (Siemens)

==Driver support for the USB-Prommer==

S5/S7 for Windows ® supports the '''libusb driver''' which allows the operation of the [http://www.ibhsoftec.com/USB-S5S7-Prommer-S-Eng Siemens USB-Prommer] (6ES7 792-0AA00-0XA0) under current operating systems. 
Depending on whether the original Siemens driver for the USB-Prommer is already installed on the PC, the libusb driver must be installed in two different ways.

===Check whether the Siemens USB-Prommer driver is installed ===

If the USB-Prommer is connected to the PC, check within the '''device manager''' whether the Siemens USB-Prommer driver is installed.

'''Siemens driver for the USB-Prommer is ''already'' installed on the PC:'''

[[Image:System_with_driverr.png]]

'''Siemens driver for the USB-Prommer is ''not'' installed on the PC:'''

[[Image:System_no_driverr.png]]

==Installation of the libusb driver '''with''' already installed Siemens driver==

In this case the  '''libusb-win32 filter driver''' must be installed. This allows a control of the USB prommer parallel to the already installed Siemens driver, without impairing its function.

After the  start of the Setup the option '''Install a device filter''' must be chosen.

[[Image:Libusb_filter_driver.png]]

After installation the '''libusb-win32 filter installer''' needs to be started. Within this program the entry for the USB-Prommer must be selected and the button '''Install''' msut be pressed.

[[Image:Libusb_device_selection.png]]

The successful installation is indicated by the following message:

[[Image:Libusb_success.png]]

The dialog can be closed. The installation is completed and the USB-Prommer can be used within S5/S7 for Windows®.

'''Note:''' If an update of the Siemens software is performed, the driver needs to be installed again!

==Installation of the libusb driver '''without''' installed Siemens driver==

In this case the '''ZAdik Device Treiber''' must be installed.

When using the operating system '''Windows XP''' the setup with the file name'''zadig_xp_2.1.0.exe''' must be started.

When using the operating system '''VISTA, Windows 7 or Windows 8''' the Setup with the file name'''zadig_2.1.0.exe''' must be started.

After installation the '''ZAdik Device Driver''' will be started. Within this program the entry for the USB-Prommer and the driver '''libsub-win32(v1.2.6.0)'''must be selected and the button '''Install''' msut be pressed.

The '''libsub-win32 (v1.2.6.0)''' must also be selected when using 64 bit operating systems!

[[Image:Prommer driver.png]]


The dialog can be closed. The installation is completed and the USB-Prommer can be used within S5/S7 for Windows®.

==Using the Siemens driver without libusb driver==

Caution: 
The supplied driver (10/2007) can only be installed on 32-bit systems. 
Newer versions of the driver only have support for S7 memory modules.