View source for IBH Link IoT:Startup operations

== Mounting and Connection ==

The '''IBH Link IoT''' is designed for DIN rail mount:

[[Image:IBH_Link_IoT_rail_mount.png|600px]]


[[Image:ACHTUNG.png|64px]]

'''ATTENTION!''' 

'''The IBH Link IoT requires a 12 - 36V DC power supply. Higher voltages may destroy the device. Pay attention to polarity.'''

[[Image:IBH_Link_UA_24V.png|200px]]

Power supply: '''24VDC / 0,2A'''
<br />
<br />
<br />

== Configuration of the IP addresses ==

The administration can be made with a recent web browser over the Ethernet port 1 by using the host name http://'''ibhlink-iot_<serial number>''' (f.i. http://'''ibhlink-iot_000161''')

or over the ports 2-4 by entering the default IP Address '''192.168.1.14'''

On the PC the IBHNet-Iot driver is required. The Driver is available free of charge.

[[Image:IBH_Link_IoT_Ports_eng.png|600px]]

Default IP Address configuration:
{| class="wikitable"
|-
! Level !! Port !! Address
|-
| Management level|| Port 1 || Host name: '''ibhlink-iot-<serial number>'''
|-
| Control level || Port 2 - 4 || '''192.168.1.14'''
|}

Default Login:

'''admin'''

'''admin'''

[[Image:IBH_Link_IoT_Login.png|743px]]

== Network: Management Level ==

Network configuration for Port 1 (Management level respectively Supervision Level):

[[Image:IBH_Link_IoT_Management_Level.png|792px]]

== Network: Control Level ==

Network configuration for Port 2 - 4 (Control Level respectively Machine Level):

[[Image:IBH_Link_IoT_Controlt_Level.png|772px]]

== Assigment Token ==

After logging into the '''TeamViewer IoT Management Console''' the '''Assigment Token''' can be copied:

[[Image:IBH_Link_IoT_TW_Assigment_token_Menue.png|227px]]

[[Image:IBH_Link_IoT_TW_Assigment_token_Copy.png|701px]]

The token must be copied into the '''Assigment Token'' field and assigned:

[[Image:IBH_Link_IoT_TW_Assigment_token_Assign.png|637px]]

== IBH Net IoT Tray ==

The required '''IBH Link IoT''' driver is available free of charge on our homepage: 
'''[http://download.ibhsoftec.com/neutral/IBHNet-IoT-Setup.exe IBH Link IoT Driver]'''

[[Image:IBH_Link_IoT_Start_Menue_Eng.png|310px]]


== Agents ==

With the menu item '''Agents''' the TeamViewer connections to the '''IBH Link IoT''' can be created:

[[Image:IBH_Link_IoT_Tray_Agents_Eng.png|298px]]


The display name can be freely chosen. The '''TeamViewer ID''' to be used for each device can be seen in the web interface:


[[Image:IBH_Link_IoT_Short_Cuts.png|871px]]


== Connection setup ==

Via the IBH Link IoT Tray the connection can now be established:

[[Image:IBH_Link_IoT_Tray_Connect.png|304px]]


[[Image:IBH_Link_IoT_Connection.png|633px]]

After successful connection establishment, the IBH Link IoT appears as WireGuard tunnel in the Network Adapters:

[[Image:IBH_Link_IoT_WireGuard_Tunnel.png|264]]

From now on, all controls that are connected via the control level of the IBH Link IoT are accessible via TeamViewer.