View source for IBHNet:Reset/Factory settings

== Reset of the ''IBH Link S7 / S7 Plus'' : ==

Due to the nature of the '''''IBH Link S7''''' and the '''''IBH Link S7 Plus''''' they may not be found in &quot;IBH Links in the local network&quot; for several reasons. In this case you can reach them by doing the following steps:

* Start &quot;Administrate IBHNet stations&quot;. 
* In &quot;Administrate IBHNet stations&quot; click on the button &quot;IBH Link S7&quot;
* In the window &quot;IBH Links in the local network&quot; please click the button &quot;Search again&quot;.
* After that you will get a message box, which must stay open at this point
* Now you have to remove the power from the '''''IBH Link'''''
* As soon as the '''''IBH Link''''' is repowered, close the advice window '''exactly''' after 6 seconds.


The time of 6 seconds have to kept '''exactly''' because the '''''IBH Link''''' has finished booting but has no IP-address at this point. It is recommendable to use a clock with second hand. If this was successful the '''''IBH Link''''' appears with the IP-address 0.0.0.0.

== Default settings ==

To set the default settings of the '''''IBH Link S7 / Plus''''' and you have to take the following settings manually:

{|class="wikitable"
!IP-Address settings: !!
|-
|style="width:14em"|IP-Adress:||style="width:6em"|0.0.0.0
|-
|Subnet mask:||0.0.0.0
|-
|Gateway:||0.0.0.0
|-
|⇒Static ||
|-
|}

{|class="wikitable"
!Profibus-parameters: !!
|-
|style="width:14em"|Communication speed:||style="width:6em"|187,5 kbit/s
|-
|Own device-address:||0
|-
|Maximum device-address:||31
|-
|Bus-profile:||MPI/PPI
|-
|}

{|class="wikitable"
!Advanced settings: !!
|-
|style="width:14em"|Tslot_Init:||style="width:6em"|415
|-
|Max. Tsdr:||400
|-
|Min. Tsdr:||60
|-
|Tset:||1
|-
|Tqui:||1
|-
|Gap-Factor:||20
|-
|Retry Limit:||2
|-
|Ttr:||10000
|-
|}